TROUBLE SHOOTING CHART
Engine overheats.
Engine cooling system | Clean debris screen and |
clogged. | engine cooling fins. |
|
|
Carburetor out of adjustment. | Adjust carburetor. Take the |
| unit to an authorised Service |
| Dealer. |
|
|
| Oil level is low. | Add oil. |
|
|
|
Engine will not stop | Defective throttle control | Inspect and replace |
running. | lever or wire. | damaged parts. |
|
|
|
| Throttle not adjusted | Move throttle to the full OFF |
| properly. | position. |
|
|
|
Poor trimming | Trimmer line length is too | Correct line length is 52cm |
performance. | short. | (21.5 inches). When less |
|
| than 1/2 this length, replace |
|
| the line. |
|
|
|
Engine not set at FAST speed.
Move engine throttle lever to FAST position.
Trimmer vibrates | Trimmer line lengths are | Adjust trimmer line to |
| substantially different. | approximately equal lengths. |
|
|
|
| Loose nuts or bolts. | Check all bolts and nuts, |
|
| including engine bolts. |
|
|
|
| Broken trimmer head. | Replace broken part. |
|
|
|
Trimmer head does not | Trimmer line not properly | Follow instructions on decal |
retain line | attached. | or in the Maintenance |
|
| section of the owner’s |
|
| handbook. |
|
|
|
| Broken line retainer. | Replace trimmer head |
|
| assembly. |
|
|
|
| Trimmer line not correct size. | Use 3,3mm (0.130 inch) |
|
| diameter trimmer line. |
|
|
|
276798MA DRAFT COPY | 21 |