SAFETY RULES
2.Never run an engine indoors or inside a closed area.
3.Never make adjustments or repairs with the engine running. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental start- ing. Always wear eye protection when you make adjustments or repairs.
4.Check the trimmer head and engine mounting bolts at frequent intervals for proper tightness.
5.Keep all nuts and bolts tight and keep equipment in good condition. Check mounting hardware on trimmer head ev- ery time you change trimmer line and prior to each use.
6.Never tamper with safety devices. Check their proper operation regularly.
7.When servicing or repairing the ma- chine, do not tip the machine over or up unless specifically instructed to do so in this Manual. Service and repair proce- dures can be done with the machine in an upright position. Some procedures will be easier if the machine is lifted on a raised platform or working surface.
8.To reduce fire hazard, keep machine free of grass, leaves, or other debris build−up. Clean up oil or fuel spillage. Allow machine to cool before storing.
9.Stop and inspect the equipment if you strike an object. Repair, if necessary, be- fore restarting.
10.Always disconnect spark plug wire be- fore cleaning, repairing, or adjusting.
11.Do not change the engine governor set- ting or over−speed the engine.
12.Clean and replace safety and instruction decals as necessary.
13.To guard against engine over−heating, always have engine debris filter mounted and clean.
14.Inspect machine before storage.
15.Use only original equipment or autho- rised replacement parts.
16.Never replace the cutting lines with met- al parts.
276798MA DRAFT COPY | 6 |