Homelite UT20811E Maintenance, Spool Replacement EZ Line TAP Advance System, NEW Prewound Spool

Page 11

MAINTENANCE

WARNING:

Use only original manufacturer's replacement parts, accessories and attachments. Failure to do so may cause poor performance, possible injury and may void your warranty.

You can often make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorized service dealer.

SPOOL REPLACEMENT

EZ LINE™ TAP ADVANCE SYSTEM

NEW PREWOUND SPOOL

See Figures 10 and 11.

If replacing string only, refer to “String Replacement” later in this manual.

Use only .080 in. (2.0 mm) diameter monofilament string. Use original manufacturer's replacement string for best performance.

1.Stop the engine, disconnect the spark plug wire. Hold the string head and unscrew the spool retainer. Turn counterclockwise.

2.Remove the empty spool from the string head. Keep the spring attached to the spool.

3.To install the new spool, make sure the two strings are captured in the slots opposite each other on the new spool. Make sure the ends of each string is extended approximately 6 in. (152 mm) beyond each slot.

4.Thread the strings into the eyelets in the string head. Carefully push the spool into the string head (gently pull the strings to the outside if necessary). When the spool is positioned in the string head, grasp the strings and pull sharply to release them from the slots in the spool.

5.Push down and turn the spool counterclockwise until it no longer turns. Hold the spool down and rotate clock- wise a small amount. Release the spool. The spool should be locked down in the string head. If not, hold down and rotate until locked.

6.Make sure the string head and the spool retainer are installed on the drive shaft by turning the retainer clockwise to tighten.

7.Pull the strings again to rotate the spool into cutting position. Push the spool retainer down while pulling on string(s) to manually advance the string and to check for proper assembly of the string head.

Page 11

SPOOL

RETAINER

Fig. 10

SPRING

SLOTS

EYELETS

STRING HEAD

DRIVESHAFT

Fig. 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operators Manual Introduction Table of ContentsImportant Safety Instructions Specific Safety Rules for Trimmer USE Symbol Name Explanation SymbolsInstructions SpecificationsFeatures UnpackingAttaching the Storage Hanger AssemblyAttaching the Power Head to the Trimmer Attachment Removing the Attachment from the Power HeadGrass Deflector HandleFuel Mixture Premium Exact MIX Gasoline OIL Fueling and Refueling the TrimmerOperating the Trimmer Fuel MixtureCutting Tips OperationAdvancing the String CUT OFF BladeTo Start a Warm Engine Starting and StoppingSee To Start a Cold EngineSee Figures 10 MaintenanceSpool Replacement EZ Line TAP Advance System NEW Prewound SpoolArrows on Spool Anchor Hole First String String ReplacementCleaning the Exhaust Port and Muffler Spark Arrestor See Figures 12, 13, 14,Storing the Trimmer 1 Month or Longer Replacing and Cleaning AIR FilterFuel CAP Spark PlugSpeed. See Figure TroubleshootingIdle Speed Screw Mixture Needle Limited Warranty Statement WarrantyManufacturers Warranty Coverage AIR Filter Assy Description Service PartsCalifornia Proposition Service Repair Parts

UT20811E specifications

The Homelite UT20811E is a powerful electric string trimmer designed to meet the demands of homeowners and professional landscapers alike. This model stands out for its efficiency and user-friendly features, making it an ideal choice for tackling overgrown lawns, edging flower beds, and maintaining tidy borders around driveways and sidewalks.

One of the main features of the UT20811E is its robust 13-amp motor, which delivers impressive power for cutting through thick weeds and grass. This electric trimmer eliminates the need for gasoline and oil, reducing the environmental impact while providing a quieter lawn care experience. With a no-pull, easy-start operation, users can simply plug in the trimmer and get to work with minimal fuss.

The UT20811E incorporates a dual-line automatic feed system, ensuring a continuous supply of trimmer line as you work. This feature saves time and effort, eliminating the need for manual line adjustments. The trimmer is equipped with a 0.065-inch line diameter, allowing for efficient cutting and improved performance.

In addition to its cutting capabilities, the Homelite UT20811E offers a telescoping shaft that adjusts to accommodate users of different heights, promoting ergonomic comfort during extended use. The rotating head provides versatility as the trimmer can smoothly transition from trimming to edging, giving users the ability to achieve a professional-looking finish.

Safety is also a priority with this model; it features a protective guard that shields users from debris and allows for close trimming around delicate plants. The lightweight design of the trimmer makes it easy to maneuver, reducing fatigue during longer jobs.

The Homelite UT20811E is further enhanced by its durable construction, ensuring longevity and reliability. The product also comes with a 3-year warranty, providing users with peace of mind regarding its performance and durability over time.

In summary, the Homelite UT20811E electric string trimmer combines power, convenience, and safety features to offer an exceptional tool for lawn care. Whether you are a weekend warrior or a seasoned professional, this versatile trimmer is designed to exceed expectations, making yard maintenance more efficient and enjoyable.
Top Page Image Contents