Homelite UT41002 manual Attaching the Grass Deflector

Page 9

ASSEMBLY

ATTACHING THE GRASS DEFLECTOR

See Figure 4.

WARNING:

The line cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contact can result in serious personal injury.

Follow these steps to attach the grass deflector.

1.Slide the grass deflector onto the attachment shaft and fit it over the bracket.

2.Install the bolt through the holes in the tabs on the grass deflector and the slots in the bracket on the attachment shaft.

3.Install the flat washer, the lock washer, and the wing nut.

4.Tighten the wing nut securely.

5.Remove the protective packaging from the line cutting blade.

Page 9

GRASS	WING
DEFLECTOR	NUT

LINE

CUTTING

BLADE

BOLT

Fig. 4

Image 9

Contents Operators Manual Introduction Table of ContentsGeneral Safety Rules SafetySpecific Trimmer Safety Rules Electrical Safety RulesMaintenance Rules Service RulesStorage and Transportation Rules Symbol Name Explanation SymbolsUnpacking SpecificationsDrive Shaft and Cutting Head InformationFeatures Connecting the Attachment to the Upper Shaft AssemblyRemoving the Attachment from the Upper Shaft Attaching the Front HandleAttaching the Grass Deflector Starting and Stopping the Trimmer OperationOperating the Trimmer Cutting TipsAdvancing the Cutting Line Automatically Advancing the Cutting Line ManuallyRetaining CAP Line Cleaning the Trimmer MaintenanceServicing the Trimmer Replacing the Cutting LineDrive Shaft Trimmer Head Spool Replacing the SpoolProblem Possible Cause Solution TroubleshootingAccessories Limited Warranty Statement WarrantyPage Customer Service Information