Husqvarna 333R-Series manual Fuel Handling, Fuel safety

Page 16

FUEL HANDLING

Fuel safety

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage.

•In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long-term storage, if the machine is not under close supervision and when performing all service measures.

WARNING! Take care when handling fuel.

!Bear in mind the risk of fire, explosion and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of petrol and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Fuel and fuel fumes are highly

!inflammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

Petrol

CAUTION! Always use a quality petrol/oil mixture at least 90 octane (RON). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Leaded petrol will destroy the catalytic converter.

Use low-emission petrol, also known as alkylate petrol, if it is available.

•The lowest octane recommended is 90 (RON). If you run the engine on a lower octane grade than 90 so-called knocking can occur. This gives rise to a high engine temperature, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two- stroke engine oil, which is specially formulated for our air- cooled two-stroke engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•A poor oil quality and/or too high oil/fuel ratio may jeopardise function and decrease the life time of catalytic converters.

•Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

1:33 (3%) with oils class JASO FB or ISO EGB formulated for air-cooled, two-stroke engines.

Petrol, litre

Two-stroke oil, litre

 

 

2% (1:50)

3% (1:33)

 

 

 

 

5

0,10

0,15

 

 

 

10

0,20

0,30

 

 

 

15

0,30

0,45

 

 

 

20

0,40

0,60

 

 

 

16 – English

Page 15 Page 17
Image 16
Page 15 Page 17
Contents 333R 335RX-series KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what on the clearing saw?General Safety Precautions Personal protective equipmentStop switch Machine′s safety equipmentThrottle lock Cutting attachment guard Vibration damping systemQuick release MufflerLocking nut Cutting equipment Cutting equipmentSharpening grass cutters and grass blades Sharpening the saw blade Trimmer headAssembly Assembling the handlebar and throttleAssembling the cutting equipment Fitting the guard extensionFitting a blade guard, grass blade and grass cutter Fitting the blade guard and saw bladeAdjusting the harness and clearing saw Fitting other guards and cutting attachmentsStandard harness Spreading the load on your shouldersTriobalance harness Adjusting the harnessCorrect balance Fuel Handling Fuel safetyFuel Fuelling MixingStarting and Stopping Check before startingStarting and stopping StartingFor throttle handles with a start throttle lock StoppingBasic safety rules Working TechniquesGeneral working instructions ABC of clearingForestry clearing using a saw blade Working methodsBrush cutting with a saw blade Grass clearing using a grass bladeGrass trimming with a trimmer head Clearing Maintenance CarburettorFine adjustment of the idle speed T Correctly adjusted carburettorAdjusting the start throttle speed High speed jet HCooling system MufflerBevel gear Cleaning the air filter Air filterSpark plug Oiling the air filterMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataEC-declaration of conformity Applies to Europe onlyPage S35 095-.106 T35 T45 Auto Trimmy SII ´z+R56¶6u¨ Page 1150212-26 ´z+R56¶6u¨ ´z+R56¶6u¨

333R-Series specifications

The Husqvarna 333R-Series represents a pinnacle of engineering in the realm of professional-grade brushcutters. Designed for heavy-duty performance, the 333R is an ideal choice for landscape professionals and homeowners alike, providing an efficient solution for tackling thick grass, weeds, and brush. Its robust construction and advanced features make it a reliable tool in various trimming and clearing applications.

One of the standout characteristics of the 333R-Series is its powerful engine. Equipped with a high-performance 32.6 cc, 2-stroke engine, it delivers exceptional torque and speed, enabling users to cut through dense undergrowth with ease. The engine is designed with Husqvarna's X-Torq technology, which optimizes fuel efficiency by reducing fuel consumption and emissions. This not only benefits the environment but also allows for longer operating times between refuels, a crucial factor for professional landscapers working long hours.

The ergonomics of the 333R-Series enhance user experience significantly. Its lightweight design, combined with a balanced frame, reduces fatigue during prolonged use. The comfortable shoulder harness ensures that the weight of the tool is evenly distributed, allowing for easier maneuverability without sacrificing power. Additionally, the adjustable handlebar provides customizable grip positions, ensuring comfort for users of all sizes.

The cutting equipment of the Husqvarna 333R-Series is another critical feature that sets it apart. It comes with a unique twin line cutting system that uses a high-capacity trimmer head, enabling swift and precise cutting. The ability to quickly swap between trimming heads, including blades for heavier brush, adds versatility to the tool, catering to varying job requirements.

Husqvarna has also integrated advanced anti-vibration technology into the 333R-Series, which minimizes hand and arm strain during operation. This feature enhances overall user comfort, allowing operators to work longer while reducing the risk of fatigue-related injuries.

Moreover, the 333R-Series boasts a tool-less air filter access, simplifying maintenance and increasing uptime. With a robust build and reliable technology, users can trust that this brushcutter will withstand demanding conditions and deliver consistent performance over time.

In summary, the Husqvarna 333R-Series is a powerful, efficient, and ergonomically designed brushcutter that meets the challenges faced by landscaping professionals and avid garden enthusiasts. Its blend of performance, comfort, and ease of maintenance makes it a preferred choice for anyone looking to maintain their outdoor spaces effectively.
Top Page Image Contents