Husqvarna 333R-Series manual Starting and Stopping, Check before starting, Starting and stopping

Page 18

STARTING AND STOPPING

Check before starting

•Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the centre hole. The most common reason why cracks are formed is that sharp corners have been formed at the bottom of the teeth while sharpening or that the blade has been used with dull teeth. Discard a blade if cracks are found.

•Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked.

•Ensure the locking nut has not lost its captive force. The nut lock should have a locking force of at least 1.5 Nm. The tightening torque of the locking nut should be 35-50 Nm.

•Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked.

•Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked.

•Never use the machine without a guard nor with a defective guard.

•All covers must be correctly fitted and undamaged before you start the machine.

Starting and stopping

WARNING! The complete clutch cover and

!shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Always move the machine away from the refuelling area before starting. Place the machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object.

Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres.

Starting

Choke: Set the choke control in the choke position.

Primer bulb: Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

WARNING! When the engine is started with

!the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately.

Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Grip the starter handle, slowly pull out the cord with your right hand until you feel some resistance (the starter pawls grip), now quickly and powerfully pull the cord. Never twist the starter cord around your hand.

Repeat pulling the cord until the engine starts. When the engine starts. return choke control to run position and apply full throttle; the throttle will automatically disengage from the start setting.

18 – English

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 333R 335RX-series KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what on the clearing saw?General Safety Precautions Personal protective equipmentMachine′s safety equipment Stop switchThrottle lock Quick release Cutting attachment guardVibration damping system MufflerLocking nut Cutting equipment Cutting equipmentSharpening grass cutters and grass blades Sharpening the saw blade Trimmer headAssembling the cutting equipment AssemblyAssembling the handlebar and throttle Fitting the guard extensionFitting a blade guard, grass blade and grass cutter Fitting the blade guard and saw bladeStandard harness Adjusting the harness and clearing sawFitting other guards and cutting attachments Spreading the load on your shouldersAdjusting the harness Triobalance harnessCorrect balance Fuel safety Fuel HandlingFuel Fuelling MixingStarting and stopping Starting and StoppingCheck before starting StartingFor throttle handles with a start throttle lock StoppingGeneral working instructions Basic safety rulesWorking Techniques ABC of clearingForestry clearing using a saw blade Working methodsGrass clearing using a grass blade Brush cutting with a saw bladeGrass trimming with a trimmer head Clearing Maintenance CarburettorAdjusting the start throttle speed Fine adjustment of the idle speed TCorrectly adjusted carburettor High speed jet HMuffler Cooling systemBevel gear Spark plug Cleaning the air filterAir filter Oiling the air filterMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataEC-declaration of conformity Applies to Europe onlyPage S35 095-.106 T35 T45 Auto Trimmy SII ´z+R56¶6u¨ Page 1150212-26 ´z+R56¶6u¨ ´z+R56¶6u¨

333R-Series specifications

The Husqvarna 333R-Series represents a pinnacle of engineering in the realm of professional-grade brushcutters. Designed for heavy-duty performance, the 333R is an ideal choice for landscape professionals and homeowners alike, providing an efficient solution for tackling thick grass, weeds, and brush. Its robust construction and advanced features make it a reliable tool in various trimming and clearing applications.

One of the standout characteristics of the 333R-Series is its powerful engine. Equipped with a high-performance 32.6 cc, 2-stroke engine, it delivers exceptional torque and speed, enabling users to cut through dense undergrowth with ease. The engine is designed with Husqvarna's X-Torq technology, which optimizes fuel efficiency by reducing fuel consumption and emissions. This not only benefits the environment but also allows for longer operating times between refuels, a crucial factor for professional landscapers working long hours.

The ergonomics of the 333R-Series enhance user experience significantly. Its lightweight design, combined with a balanced frame, reduces fatigue during prolonged use. The comfortable shoulder harness ensures that the weight of the tool is evenly distributed, allowing for easier maneuverability without sacrificing power. Additionally, the adjustable handlebar provides customizable grip positions, ensuring comfort for users of all sizes.

The cutting equipment of the Husqvarna 333R-Series is another critical feature that sets it apart. It comes with a unique twin line cutting system that uses a high-capacity trimmer head, enabling swift and precise cutting. The ability to quickly swap between trimming heads, including blades for heavier brush, adds versatility to the tool, catering to varying job requirements.

Husqvarna has also integrated advanced anti-vibration technology into the 333R-Series, which minimizes hand and arm strain during operation. This feature enhances overall user comfort, allowing operators to work longer while reducing the risk of fatigue-related injuries.

Moreover, the 333R-Series boasts a tool-less air filter access, simplifying maintenance and increasing uptime. With a robust build and reliable technology, users can trust that this brushcutter will withstand demanding conditions and deliver consistent performance over time.

In summary, the Husqvarna 333R-Series is a powerful, efficient, and ergonomically designed brushcutter that meets the challenges faced by landscaping professionals and avid garden enthusiasts. Its blend of performance, comfort, and ease of maintenance makes it a preferred choice for anyone looking to maintain their outdoor spaces effectively.
Top Page Image Contents