Husqvarna H348SL owner manual Support Assembly See Fig, Container Mounting See Fig

Page 6

2

MOUNTING COVER ASSEMBLY TO

SUPPORT ASSEMBLY (See Fig. 2)

NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting cover assembly to tractor.

1.Position cover assembly on ground behind tractor.

2.Lift and rotate cover to align cover brackets with support assembly tubes.

3.Slide cover assembly down onto the support tubes.

3 CONTAINER MOUNTING (See Fig. 3)

1.Install one container to left side fi rst. Install another container to center position and one in right position.

NOTE: Left edge of right container should always overlap right edge of left container at center supports.

2.Close cover and lock latches over center support tubes. To lock and release latches, pull back on latch handles.

COVER ASSEMBLY

SUPPORT

ASSEMBLY

03024

FIG. 2

COVER LATCH HANDLES

CONTAINER

CENTER

SUPPORT

HANDLES

TUBES

 

FIG. 3

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Number H348SL Product No 73 Inch Mower Grass Catcher General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationTable of Contents Know Your Grass Catcher Tools Required for AssemblyCarton Contents Parts IdentificationDrawbar a See Figs A, 1B & 1C AssemblyBagger Support Assembly Drawbar B See DSupport Assembly See Fig Container Mounting See FigLower Chute See Fig Upper Chute See Figs a and 5BLevel Mower Deck Operation Tips for Improved Bagging OperationCustomer Responsibilities Blade CareRepair Parts
Top Page Image Contents