Husqvarna H348SL owner manual Lower Chute See Fig, Upper Chute See Figs a and 5B, Level Mower Deck

4 LOWER CHUTE (See Fig. 4)

1.Raise and hold defl ector shield in upright position.

2.Place slot in lower chute over mounting tab on mower and position lower chute over mower opening as shown.

3.Hook rear latch into fl ange hole on back of mower.

4.Hook front latch into tab hole on front of mower.

CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation.

DEFLECTOR	OPTIONAL
SHIELD	FRONT
	GAUGE
	WHEEL

5 UPPER CHUTE (See Figs. 5A and 5B)

1.Lower mower to its lowest cutting position.

2.Assemble upper chute by inserting curved end into hole in back of cover.

TIP: Holding upper chute as shown and twisting while installing in cover will help keep the rubber seal in place.

NOTE: Handle carefully so as not to damage full bag indi- cator.

UPPER CHUTE

COVER

FIG. 5A

3.Push in and turn upper chute until it is in line with lower chute.

4.Align the bosses on lower chute with alignment slots on upper chute and slide together.

5.Secure with rubber latch by hooking hole in latch over latch pin.

02552

TAB

FRONT

LATCH

COVER	FULL BAG INDICATOR	UPPER
		CHUTE
		HANDLE
		LATCH PIN

REAR LATCH

FIG. 4

RUBBER

LATCH

ALIGNMENT

SLOT BOSSES

LOWER CHUTE

FIG. 5B

6 LEVEL MOWER DECK

Be sure deck is properly leveled for best mower perfor- mance. See your tractors owner's manual for instruc- tions.

7