ASSEMBLY
1 BAGGER SUPPORT ASSEMBLY
Determine which type drawbar you have on your tractor.
Compare the drawbar illustrations below to the drawbar located at the rear of your tractor.
Follow the support assembly instructions that apply to your type drawbar.
DRAWBAR A | DRAWBAR B |
DRAWBAR A (See Figs. 1A, 1B & 1C)
1.Remove and discard the upper bolt on both sides of the drawbar. Using the same holes, install the shoulder bolts supplied and tighten securely.
REMOVE AND DISCARD
UPPER BOLTS AND INSTALL
SHOULDER BOLTS SUPPLIED
| 253 | 1 |
0 |
| |
|
|
3.Align support assembly pin with hole in drawbar and hang assembly over the shoulder bolts.
4.Be sure support assembly is seated properly and secure with retainer spring supplied.
SHOULDER
BOLTS
SUPPORT
ASSEMBLY
02530
PIN
RETAINER
SPRING
FIG. 1C
DRAWBAR B (See Fig. 1D)
1.Discard adapters provided - not required for drawbar type B.
2.Align support assembly pin with hole in drawbar and hang assembly over the shoulder bolts.
3.Be sure support assembly is seated properly and secure with retainer spring supplied.
SHOULDER
BOLTS
FIG. 1A
DRAWBAR
2.Install adapter to both sides of support assembly as shown.
ADAPTER
FIG. 1B
5
SUPPORT
ASSEMBLY
3064
PIN
RETAINER
SPRING
FIG. 1D