Contents

Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

Maintenance, replacement, or repair of the emission control devices and systems may be performed by any nonroad engine repair establishment or individual.

!WARNING!

Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorised modifications and/or accessories can result in serious personal injury or the death of the operator or others.

Your warranty does not cover damage or liability caused by the use of non- authorized accessories or replacement parts.

!WARNING!

The inside of the muffler with catalytic converter contains chemicals that may cause cancer. Do not contact inside of damaged muffler.

IMPORTANT ENGINE INFORMATION

HUSQVARNA AB HUSKVARNA SWEDEN TWC

THIS ENGINE CONFORMS TO U.S.EPA PH2 AND 2000-2003

CALIFORNIA EMISSON REGULATIONS FOR SMALL OFF-

ROAD ENGINES.REFER TO OPERATOR`S MANUAL FOR

MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.

THE AIR INDEX OF THIS ENGINE IS 3

THE LOWER THE AIR INDEX, THE LESS POLLUTION

EMISSIONS COMPLIANCE PERIOD: CATEGORY

This engine label certifies that the product has been approved in accordance with American exhaust emissions requirements EPA Ph II and CARB Tier II.

The Emissions Compliance Period referred to on th emissions Compliance label indicates th number of operating hours for which the engine has been shown to meet Federal and Califor- nia emisson requirements.

Category C = 50 hours, B = 125 hours, and A = 300 hours.

List of contents
SYMBOL EXPLANATION
Symbols	2
CONTENTS
List of contents	3
SAFETY INSTRUCTIONS
Personal protective equipment	4
The machine‘s safety equipment	4
Control, maintenance and service of the machine‘s safety
equipment	7
Cutting equipment	10
General safety instructions	11
General working instructions	12
Basic clearing techniques	13
WHAT IS WHAT?
What is what on the brushcutter?	16
ASSEMBLY
Assembling the handlebars	17
Transport position, handlebars	17
Assembly of the blade and trimmer head	18
Assembling the blade guard and grass blade	18
Assembling the blade guard and clearing blade	18
Assembling the spray guard and trimmer head
Superauto II	19
Assembling other guards and cutting equipment	19
Adjusting the harness and clearing saw	20
FUEL HANDLING
Fuel mixture	21
Fuelling	21
START AND STOP
Control before starting	22
Start and stop	22
MAINTENANCE
Carburetor	23
Muffler	25
Cooling system	25
Angle gear	25
Two-part shaft	25
Air filter	26
Spark plug	26
Filing the grass blade	26
Sharpening the clearing blade	27
Maintenance schedule	27
TECHNICAL DATA
326R-X	28
FEDERAL AND CALIFORNIA EMISSION CONTROL
WARRANTY STATEMENT
Your warranty rights and obligations	30

English – 3