Husqvarna 326RX manual Assembly, Assembling the handlebars, Transport position, handlebars

Page 17

ASSEMBLY

Assembling the handlebars

•Remove the screw at the rear of the throttle handle.

•Slide on the throttle handle on the right-hand side of the handlebars, (see the diagram).

•Align the hole in the throttle handle for the fixing screw with the hole on the handlebars.

•Refit the screw in the rear of the throttle handle.

•Fit the screw through the throttle handle and the handlebars and tighten.

•Unscrew the bracket components from the handlebar bracket.

•Position the handlebars as shown. Fit the bracket components and tighten the handle lightly.

• Put on the harness and hang the machine in the suspension hook. Now finely adjust so that the machine gives a comfortable working position when it‘s attached to the harness. Tighten the handle.

Transport position, handlebars

• The handlebars can easily be turned to fit along the shaft for easy transportation and storage.

•Loosen the knob. Turn the handles clockwise so that

the throttle comes against the engine.

• Thereafter fold the handlebars around the shaft. Tighten the handle.

•Attach the transport guard.

English – 17

Image 17

Contents 114 00 326RX-SERIESSymbols Symbol ExplanationContents Machine‘s safety equipment Safety InstructionsPersonal protective equipment Throttle trigger lockCutting attachment guard Stop switchAnti-vibration system Quick-releaseLocking nut MufflerCutting equipment Throttle trigger lock Vibration damping system Cutting equipment Sharpening Cutting equipmentGrass blade Trimmer headFuel safety General safety instructionsStart Transport and storageGeneral working instructions Basic safety precautionsDesignations Adjusting the harness and clearing sawBasic clearing techniques Brush cutting using the saw blade Grass clearing using a grass blade Clearing‘s ABC Working methodsClearing Grass clearing using the trimmer head and plastic bladesTrimming SweepingWhat is what on the brushcutter? What is WHAT?Transport position, handlebars AssemblyAssembling the handlebars Grass blade Guard. See Technical DataFit the appropriate guard Adjusting the harness and clearing saw Fuelling Fuel HandlingFuel mixture Start and stop Start and StopControl before starting Carburetor MaintenanceHigh speed needle Final setting of the idling speed TCorrectly adjusted carburetor Angle gear MufflerCooling system Oiling the air filter Air filter Spark plugFiling the grass blade Daily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data Technical DataFederal and California Emission Control Warranty Statement Super Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro ~ 3,5 m Trimmy SII ´+H!y¶3D¨ Page 2001W22