Husqvarna 326RJ manual Assembly, Fitting the J-handle, Assembling the cutting equipment

Page 11

ASSEMBLY

Fitting the J-handle

•Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft.

•Slide the spacer into the slot in the loop handle.

•Fit the nut, knob and screw. Do not overtighten.

•Attach the J-handle to the loop handle using the three screws, as shown.

•Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob.

WARNING! Only grass blades/grass cutters

!or trimmer heads/plastic blades may be used when the J-handle is fitted. Saw blades must never be used with the J-handle.

Assembling the cutting equipment

WARNING! When fitting the cutting

!attachment it is extremely important that the raised section on the drive disc/support flange engages correctly in the centre hole of the cutting attachment. If the cutting attachment is fitted incorrectly it can result in serious and/or fatal personal injury.

WARNING! Never use a cutting attachment

!without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury.

IMPORTANT! If a saw blade or grass blade are to be used the machine must be equipped with the correct handlebar, blade guard and harness.

Fitting a trimmer guard and Superauto II 1" trimmer head

 

 

K

K

G

 

F

B

 

I

J

I

C

 

 

 

 

A

•Fit the correct trimmer guard (A) for use with the trimmer head. Hook the guard onto the fitting on the shaft and secure it with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•To fit the trimmer head, first separate the two halves (see diagram). Proceed as follows:

English – 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 326RJX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what on the trimmer? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentStop switch Muffler Cutting attachment guardVibration damping system Cutting equipment Cutting equipmentLocking nut Trimmer head Sharpening grass cutters and grass bladesAssembling the cutting equipment AssemblyFitting the J-handle Fitting other guards and cutting attachments Fuel Fuel safetyFuel Handling Mixing FuelingStarting Starting and StoppingCheck before starting Starting and stoppingStopping Basic working techniques Basic safety rulesWorking Techniques General working instructionsGrass trimming with a trimmer head Grass clearing using a grass bladeSweeping Carburetor MaintenanceHigh speed jet H Correctly adjusted carburetorMuffler Air filter Cleaning the air filterCooling system Spark plugBevel gear Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataMANUFACTURER′S Warranty Coverage Federal and California Emissions Control Warranty Statement Super Auto Page Trimmy H Click Trimmy Hit Pro S35 ´z+RN¶5,¨ T35, T35x 1150465-95 ´z+RN¶5,¨ ´z+RN¶5,¨

326RJ specifications

The Husqvarna 326RJ is an innovative addition to the line of string trimmers that caters to both residential and commercial users looking for efficiency and power. Designed with a focus on ergonomic handling and versatility, the 326RJ allows users to tackle various landscaping tasks with ease.

One of the standout features of the Husqvarna 326RJ is its lightweight design, weighing in at just under 10 pounds. This makes it easy to maneuver in tight spaces and reduces fatigue during extended use. The trimmer is powered by a robust 25cc two-stroke engine, which delivers reliable performance and a strong power-to-weight ratio, ensuring that it can handle tough grass and weeds without compromising speed.

Equipped with an efficient X-Torq engine, the Husqvarna 326RJ significantly reduces fuel consumption and minimizes harmful exhaust emissions. This technology not only makes it an environmentally friendly option but also means longer operating times between fuel refills. Users can expect optimal performance while minimizing their carbon footprint.

The ergonomics of the 326RJ are enhanced by the adjustable handle and comfortable grip, allowing for a customizable fit that suits various body types and working conditions. The anti-vibration technology further enhances user comfort by reducing the amount of vibration transmitted to the operator's hands, making long jobs significantly less taxing.

In terms of versatility, the Husqvarna 326RJ is designed to be compatible with a range of optional attachments. This compatibility allows it to not only function as a string trimmer but also perform tasks such as edging and brush cutting, making it a multi-functional tool for landscapers and homeowners alike.

The trimmer features a semi-automatic feed system, which ensures that the trimming line is fed out automatically when tapped on the ground. This keeps the workflow uninterrupted and allows users to focus more on their landscaping tasks without the need to frequently stop to adjust the line.

Overall, the Husqvarna 326RJ combines power, efficiency, and user comfort with a suite of advanced technologies that make it a valuable tool for anyone looking to maintain their lawn or garden. With its blend of features and innovative design, it remains a popular choice among both professionals and DIY enthusiasts.
Top Page Image Contents