Husqvarna 326RJ manual Cutting equipment, Locking nut

Page 9

GENERAL SAFETY PRECAUTIONS

If the muffler on your machine is fitted with a spark arrestor screen this must be cleaned regularly. A blocked screen will cause the engine to overheat and may lead to serious damage.

WARNING! Mufflers fitted with catalytic

!converters get very hot during use and remain so for some time after stopping. This also applies at idle speed. Contact can result in burns to the skin. Remember the risk of fire!

WARNING! The inside of the muffler contain

!chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Bear in mind that:

!The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

Locking nut

A locking nut is used to secure some types of cutting attachment.

When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left-hand thread.) When loosening and tightening the saw blade nut, there is a risk of injury from the teeth of the saw blade. You should therefore always ensure that your hand is shielded by the blade guard when doing this. Always use a socket spanner with a shaft that is long enough to allow this. The arrow in the diagram shows the area where you should operate the socket spanner when loosening or tightening the nut.

The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

•Reduce the risk of blade thrust.

•Obtain maximum cutting performance.

•Extend the life of cutting equipment.

IMPORTANT!

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter.

Keep the teeth of the blade correctly sharpened! Follow our recommendations. Also refer to the instructions on the blade packaging.

WARNING! Always stop the engine before

!doing any work on the cutting attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

WARNING! Using an incorrect cutting

!attachment or an incorrectly sharpened blade increases the risk of blade thrust.

Cutting equipment

Grass blades and grass cutters are intended for cutting coarse grass.

A trimmer head is intended for trimming grass.

English – 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 326RJX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what on the trimmer? What is WHAT?Personal protective equipment General Safety PrecautionsMachine′s safety equipment Stop switchThrottle lockout Cutting attachment guard Vibration damping systemMuffler Cutting equipment Locking nutCutting equipment Trimmer head Sharpening grass cutters and grass bladesAssembly Fitting the J-handleAssembling the cutting equipment Fitting other guards and cutting attachments Fuel safety Fuel HandlingFuel Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping Working Techniques Basic safety rulesGeneral working instructions Basic working techniquesGrass trimming with a trimmer head Grass clearing using a grass bladeSweeping Carburetor MaintenanceCorrectly adjusted carburetor MufflerHigh speed jet H Cooling system Cleaning the air filterSpark plug Air filterBevel gear Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataMANUFACTURER′S Warranty Coverage Federal and California Emissions Control Warranty Statement Super Auto Page Trimmy H Click Trimmy Hit Pro S35 ´z+RN¶5,¨ T35, T35x 1150465-95 ´z+RN¶5,¨ ´z+RN¶5,¨

326RJ specifications

The Husqvarna 326RJ is an innovative addition to the line of string trimmers that caters to both residential and commercial users looking for efficiency and power. Designed with a focus on ergonomic handling and versatility, the 326RJ allows users to tackle various landscaping tasks with ease.

One of the standout features of the Husqvarna 326RJ is its lightweight design, weighing in at just under 10 pounds. This makes it easy to maneuver in tight spaces and reduces fatigue during extended use. The trimmer is powered by a robust 25cc two-stroke engine, which delivers reliable performance and a strong power-to-weight ratio, ensuring that it can handle tough grass and weeds without compromising speed.

Equipped with an efficient X-Torq engine, the Husqvarna 326RJ significantly reduces fuel consumption and minimizes harmful exhaust emissions. This technology not only makes it an environmentally friendly option but also means longer operating times between fuel refills. Users can expect optimal performance while minimizing their carbon footprint.

The ergonomics of the 326RJ are enhanced by the adjustable handle and comfortable grip, allowing for a customizable fit that suits various body types and working conditions. The anti-vibration technology further enhances user comfort by reducing the amount of vibration transmitted to the operator's hands, making long jobs significantly less taxing.

In terms of versatility, the Husqvarna 326RJ is designed to be compatible with a range of optional attachments. This compatibility allows it to not only function as a string trimmer but also perform tasks such as edging and brush cutting, making it a multi-functional tool for landscapers and homeowners alike.

The trimmer features a semi-automatic feed system, which ensures that the trimming line is fed out automatically when tapped on the ground. This keeps the workflow uninterrupted and allows users to focus more on their landscaping tasks without the need to frequently stop to adjust the line.

Overall, the Husqvarna 326RJ combines power, efficiency, and user comfort with a suite of advanced technologies that make it a valuable tool for anyone looking to maintain their lawn or garden. With its blend of features and innovative design, it remains a popular choice among both professionals and DIY enthusiasts.
Top Page Image Contents