Husqvarna 325HS99X, 325HS75X Starting and Stopping, Check before starting, Starting and stopping

Page 12

STARTING AND STOPPING

Check before starting

•Inspect the working area. Remove any objects that could be thrown out.

•Check the cutting attachment. Never use blades that are dull, cracked or damaged.

•Check that the machine is in perfect working order. Check that all nuts and screws are tight.

•Make sure the gear housing is lubricated correctly. See instructions under the heading Gear housing.

•Check that the cutting attachment always stops when the engine is idling.

•Only use the machine for the purpose it was intended for.

•Make sure that the handle and safety features are in good working order. Never use a machine that lacks a part or has been modified outside its specifications.

•All covers must be correctly fitted and undamaged before you start the machine.

Starting and stopping

Starting

WARNING! The complete clutch cover and

!shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Always move the machine about 3 metres from the refuelling position before starting. Place the machine on a firm surface. Remember that the blades may start to move when the engine is started. Make sure the blades cannot come into contact with any object. Make sure that no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury.

Cold engine

Ignition: Set the stop switch to the start position.

Choke: Set the choke control in the choke position. The choke position is also the automatic start throttle position.

A

Air purge: Press the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled.

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 325HS75X-SERIES 325HS99X-SERIES KEY to Symbols SymbolsContents Safety Instructions Machine′s safety equipmentPersonal protective equipment Vibration damping system MufflerBlades General safety precautions Assembly of the catcher accessoryGear housing Fuel safetySafety instructions when using the hedge trimmer Safety instructions regarding the surroundingsSafety instructions while working Transport and storageSafety instructions after completing work Basic working techniquesWhat is WHAT? What is what?Fuel Handling FuelFuelling Starting and Stopping Check before startingStarting and stopping Cold engineWarm engine StoppingMaintenance CarburettorCorrectly adjusted carburettor MufflerHigh speed jet H Cleaning the air filter Cooling systemSpark plug Air filterGear housing Cleaning and lubricationMaintenance schedule Technical Data Technical dataEC-declaration of conformity Applies to Europe only Cispr 121997, EN7741140179-26

325HS75X, 325HS99X specifications

The Husqvarna 325HS99X and 325HS75X are two remarkable hedge trimmers designed for both professional landscapers and gardening enthusiasts. These models combine power, precision, and comfort, making them ideal for tackling a variety of hedging tasks.

The 325HS99X features a powerful 25.4 cc engine that delivers high performance while remaining fuel-efficient. With its long 39-inch cutting blade, operators can trim large hedges more efficiently, reducing the time spent on the job. The trimmer is equipped with a double-sided blade that cuts smoothly in both directions, allowing for faster work and cleaner cuts. This model also boasts an adjustable rear handle which can be rotated to optimize comfort during various cutting angles.

On the other hand, the 325HS75X features a slightly smaller 24.5 cc engine. Although it provides slightly lower power, it is still competent for a range of trimming tasks. The 30-inch cutting blade enables users to tackle moderate-sized hedges with ease. Like its counterpart, the 325HS75X also has a double-sided blade design, ensuring efficient operation and clean results.

Both models come equipped with Husqvarna's Anti-Vibration technology, which minimizes fatigue during prolonged use. This feature is crucial for professionals who need to use the trimmer for extended periods. Additionally, the ergonomic design of both models enhances user comfort, helping to ensure that operators maintain control even during extended sessions.

Moreover, starting these hedge trimmers is made easier thanks to Husqvarna's Smart Start technology. This system reduces the amount of effort needed to start the engine, ensuring that the trimmers are ready for action without unnecessary hassle. The air filtration system in both models helps prolong the life of the engine by keeping contaminants at bay, reducing maintenance and ensuring reliable operation over time.

In summary, the Husqvarna 325HS99X and 325HS75X hedge trimmers exemplify advanced engineering and design, making them indispensable tools for anyone serious about hedge trimming. With robust power, long blades for efficiency, and innovative features for user comfort, these hedge trimmers are built to handle the demands of both professional and household gardening tasks. Whether you're trimming dense shrubs or shaping hedges, the 325HS99X and 325HS75X offer reliability and performance that gardeners can depend on.
Top Page Image Contents