Husqvarna 426LST, 430LS manual Technical Data, Technical data

Page 20

TECHNICAL DATA

Technical data

	426LST	430LS
Motor
Cylinder displacement, cu.in/cm3	1,55/25,4	1,80/29,5
Cylinder bore, inch/mm	1,34/34	1,50/38
Stroke, inch/mm	1,10/28	1,03/26
Idle speed, rpm	3000	3000
Recommended max. speed, rpm	11500	10000
Speed of output shaft, rpm	5500	6850
Max. engine output, acc. to ISO 8893, kW/ rpm	0,87/7500	1,03/8500
Catalytic converter mufﬂer	No	No
Speed-regulated ignition system	No	No
Ignition system
Spark plug	NGK CMR7H	NGK CMR7H
Electrode gap, inch/mm	0,024-0,028/0,6-0,7	0,035-0,039/0,9-1,0
Fuel and lubrication system
Fuel tank capacity, US pint/litre	1,37/0,65	1,52/0,72
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg	12,6/5,7	13,2/6,0

Approved accessories	Type	Cutting attachment guard, Art. no.

Arbor shaft thread M10

	T25	575 38 41-01

Trimmer head	S35	575 38 41-01

	T35, T35x	575 38 41-01

20 – English

Image 20

Contents 426LST 430LS EnglishKEY to Symbols SymbolsOperator of the machine must Ensure, while working, that no Persons or animals come closerContents Introduction Dear customerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentThrottle lockout Machine′s safety equipmentStop switch Cutting attachment guard MufﬂerCutting equipment Trimmer headAssembly Fitting the loop handleAssembling the cutting equipment Fitting the trimmer guard and trimmer headFuel Fuel safetyFuel Handling Fueling MixingStarting and Stopping Check before startingStarting and stopping StartingStopping General working instructions Basic safety rulesWorking Techniques Basic working techniques Grass trimming with a trimmer headMaintenance CarburetorMufﬂer Cooling systemFuel ﬁlter Air ﬁlterBevel gear Must always be replacedMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataYour Warranty Rights and Obligations Emission Warranty Parts List T25 S35 25 m T35, T35x Page 1153174-95