Husqvarna 326L Assembly, Fitting the loop handle, Assembling and dismantling the two-piece shaft

Page 12

ASSEMBLY

Fitting the loop handle

(326C)

•Position the handle on the shaft. Note that the handle must be mounted below the arrow on the shaft.

•Fit the screw, securing plate and wing nut as shown in the diagram.

•Tighten the wing nut.

Fitting the loop handle

(326L, 326Lx, 326LDx)

•Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft.

•Slide the spacer into the slot in the loop handle.

•326L: Fit the nut, washer and screw.

326LX/326LDX: Fit the nut, knob and screw. Do not overtighten.

•Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob.

Assembling and dismantling the two-piece shaft

(326LDx)

Assembly:

•Make sure the knob is loose.

•Align the cut-out in the lower part of the shaft with the coupling locking tab on the upper part of the shaft. Then lock the sections together.

•Tighten the knob.

Dismantling:

•Undo the knob (at least three turns).

•Push the knob towards the coupling.

•Carefully twist the lower half of the shaft to unlock it.

•Hold both parts of the shaft and pull the lower part of the shaft out of the coupling.

Fitting the trimmer head

When fitting the cutting attachment it is extremely important that the raised section on the drive disc/support flange engages correctly in the centre hole of the cutting attachment. If the cutting attachment is fitted incorrectly it can result in serious and/or fatal personal injury.

WARNING! Never use a cutting attachment

!without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury.

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 326C 326L 326LX-SERIES KEY to Symbols SymbolsContents Safety Instructions Machine′s safety equipmentPersonal protective equipment Vibration damping system MufflerCutting equipment Locking nutSafety Instructions Cutting equipment Trimmer headGeneral safety precautions Fuel safetyStarting Transport and storageBasic safety rules Grass trimming using a trimmer head and plastic bladesGeneral working instructions Basic working techniquesCutting What is WHAT? What is what?Assembly Fitting the loop handleAssembling and dismantling the two-piece shaft Fitting the trimmer headFitting other guards and cutting attachments Fitting the trimmer guard and trimmer headGuard Fuel Handling FuelGasoline Two-stroke oilFuelling Starting and Stopping Check before startingStarting and stopping Cold engineStopping Maintenance CarburettorCorrectly adjusted carburettor MufflerHigh speed jet H Cooling system Spark plugShaft Air filterMaintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceTechnical Data Technical dataAttachments Art No Use with Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsSuper Auto Super Auto II Page Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro S35 25 m T35 ´z+H6e¶5/¨ Page 1140226-95

326L specifications

The Husqvarna 326L is a top-tier trimmer designed for professional landscapers and dedicated homeowners who seek power and efficiency in their garden tools. Known for its durable construction and advanced technology, the 326L exemplifies Husqvarna's commitment to producing high-quality outdoor equipment.

One of its standout features is the powerful 25cc two-stroke engine. This engine not only provides high performance but also ensures that the trimmer operates efficiently. The design minimizes vibrations, reducing operator fatigue during extended use, a critical advantage for professionals who spend long hours landscaping.

The 326L is equipped with a Smart Start system, which simplifies the starting process. This technology reduces the resistance in the starter cord by almost 40%, allowing the user to start the equipment with minimal effort. This feature is particularly beneficial for those who may struggle with traditional starting methods.

The trimmer's ergonomic design enhances user comfort. It features an adjustable handle that can be tailored to fit the user’s height and preference, allowing for optimal control during trimming tasks. The lightweight construction, combined with a balanced design, further improves maneuverability, making it easier to navigate through various terrains and obstacles.

Husqvarna has also integrated its patented T35 trimmer head into the 326L. This semi-automatic head allows for quick line feed, enabling users to quickly extend the cutting line without having to stop the machine. The T35 head is designed for efficiency, so users can focus on their work rather than dealing with frequent line replacements.

Durability is a key characteristic of the Husqvarna 326L. The trimmer is built with high-quality materials that resist wear and tear, making it suitable for heavy-duty use. The air filter system extends the life of the engine by keeping dirt and debris out, ensuring peak performance over time.

Another notable aspect is its versatility. The 326L can be equipped with various attachments, including brush blades and different types of cutting heads. This adaptability makes it suitable for a wide range of tasks, from trimming grass to clearing overgrown vegetation.

In conclusion, the Husqvarna 326L is an exceptional tool that combines power, efficiency, and longevity. Its features, including a powerful engine, user-friendly starting system, ergonomic design, and innovative cutting head, make it a valuable asset for anyone serious about lawn care and landscaping. With its proven technologies and robust construction, the Husqvarna 326L stands out as a reliable choice in the competitive market of string trimmers.
Top Page Image Contents