Husqvarna 326L manual Cutting equipment, Trimmer head

Page 7

SAFETY INSTRUCTIONS

•If the muffler on your machine is fitted with a spark arrestor mesh then it should be cleaned regularly. A blocked mesh causes the engine to overheat, which can lead to serious damage. Never use a muffler with a defective spark arrestor mesh.

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

•Obtain maximum cutting performance.

•Extend the life of cutting equipment.

General rules

1Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

2Check the cutting attachment for damage or cracks. A damaged cutting attachment should always be replaced.

Locking nut

•When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left-hand thread.)

•Tighten the nut using the socket spanner. 35-50 Nm (3.5- 5 kpm).

CAUTION! The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm.The nut should be replaced after it has been put on approx. 10 times.

WARNING! Never use a machine with faulty

!safety equipment. The machine’s safety equipment must be checked and maintained as described in this section. If your machine fails any of these checks contact your service agent to get it repaired.

Cutting equipment

IMPORTANT!

This section describes how to choose and maintain your cutting equipment in order to:

Reduce the risk of kickback.

Obtain maximum cutting performance.

Extend the life of cutting equipment.

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter.

Trimmer head

•Only use the recommended trimmer heads and trimmer cords. These have been tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting attachment. See the chapter on Technical data.

•Smaller machines generally require small trimmer heads and vice versa. This is because when clearing using a cord the engine must throw out the cord radially from the trimmer head and overcome the resistance of the grass being cleared.

•The length of the cord is also important. A longer cord requires greater engine power than a shorter cord of the same diameter.

•Make sure that the cutter on the trimmer guard is intact. This is used to cut the cord to the correct length.

•To increase the life of the cord it can be soaked in water for a couple of days. This will make the line tougher so that it lasts longer.

IMPORTANT! Always ensure the trimmer cord is wound tightly and evenly around the drum, otherwise the machine will generate harmful vibration.

WARNING! Always stop the engine before

!doing any work on the cutting attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

English – 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 326C 326L 326LX-SERIES Symbols KEY to SymbolsContents Machine′s safety equipment Safety InstructionsPersonal protective equipment Locking nut Vibration damping systemMuffler Cutting equipmentSafety Instructions Trimmer head Cutting equipmentTransport and storage General safety precautionsFuel safety StartingBasic working techniques Basic safety rulesGrass trimming using a trimmer head and plastic blades General working instructionsCutting What is what? What is WHAT?Fitting the trimmer head AssemblyFitting the loop handle Assembling and dismantling the two-piece shaftFitting the trimmer guard and trimmer head Fitting other guards and cutting attachmentsGuard Two-stroke oil Fuel HandlingFuel GasolineFuelling Cold engine Starting and StoppingCheck before starting Starting and stoppingStopping Carburettor MaintenanceMuffler Correctly adjusted carburettorHigh speed jet H Air filter Cooling systemSpark plug ShaftMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical DataAttachments Art No Use with Your Warranty Rights and Obligations Federal Emission Control Warranty StatementSuper Auto Super Auto II Page Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro S35 25 m T35 ´z+H6e¶5/¨ Page 1140226-95

326L specifications

The Husqvarna 326L is a top-tier trimmer designed for professional landscapers and dedicated homeowners who seek power and efficiency in their garden tools. Known for its durable construction and advanced technology, the 326L exemplifies Husqvarna's commitment to producing high-quality outdoor equipment.

One of its standout features is the powerful 25cc two-stroke engine. This engine not only provides high performance but also ensures that the trimmer operates efficiently. The design minimizes vibrations, reducing operator fatigue during extended use, a critical advantage for professionals who spend long hours landscaping.

The 326L is equipped with a Smart Start system, which simplifies the starting process. This technology reduces the resistance in the starter cord by almost 40%, allowing the user to start the equipment with minimal effort. This feature is particularly beneficial for those who may struggle with traditional starting methods.

The trimmer's ergonomic design enhances user comfort. It features an adjustable handle that can be tailored to fit the user’s height and preference, allowing for optimal control during trimming tasks. The lightweight construction, combined with a balanced design, further improves maneuverability, making it easier to navigate through various terrains and obstacles.

Husqvarna has also integrated its patented T35 trimmer head into the 326L. This semi-automatic head allows for quick line feed, enabling users to quickly extend the cutting line without having to stop the machine. The T35 head is designed for efficiency, so users can focus on their work rather than dealing with frequent line replacements.

Durability is a key characteristic of the Husqvarna 326L. The trimmer is built with high-quality materials that resist wear and tear, making it suitable for heavy-duty use. The air filter system extends the life of the engine by keeping dirt and debris out, ensuring peak performance over time.

Another notable aspect is its versatility. The 326L can be equipped with various attachments, including brush blades and different types of cutting heads. This adaptability makes it suitable for a wide range of tasks, from trimming grass to clearing overgrown vegetation.

In conclusion, the Husqvarna 326L is an exceptional tool that combines power, efficiency, and longevity. Its features, including a powerful engine, user-friendly starting system, ergonomic design, and innovative cutting head, make it a valuable asset for anyone serious about lawn care and landscaping. With its proven technologies and robust construction, the Husqvarna 326L stands out as a reliable choice in the competitive market of string trimmers.
Top Page Image Contents