Fuel Handling, Gasoline, Two-stroke oil, Mixing

FUEL HANDLING

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of gasoline and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Always ensure there is adequate

!ventilation when handling fuel.

Gasoline

CAUTION! Always use high grade unleaded oil mixed gasoline (minimum 87 RON). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Leaded petrol will destroy the catalytic converter and it will no longer serve its purpose.

Use low-emission gasoline, also known as alkylate gasoline, if it is available.

•This engine is certiﬁed to operate on unleaded gasoline.

•The lowest recommended octane rating is 87. If you run the engine on lower octane rating than 87 so-called “knocking“ can occur. This leads to an increased engine temperature, which can result in a serious engine breakdown.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two- stroke oil, which is specially formulated for our two-stroke engines. Mixture 1:50 (2%).

•Never use two-stroke oil intended for water-cooled outboard engines, sometimes referred to as outboard oil.

•Never use oil intended for four-stroke engines.

	Gasoline,	Two-stroke
	Gasoline,	oil, litre
	litre	oil, litre

		2% (1:50)
		2% (1:50)

	5	0,10

	10	0,20

	15	0,30

	20	0,40

	US gallon	US ﬂ. oz.

	1	2 1/2

	2 1/2	6 1/2

	5	12 7/8

Mixing

•Always mix the gasoline and oil in a clean container intended for fuel.

•Always start by ﬁlling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline.

•Mix (shake) the fuel mixture thoroughly before ﬁlling the machine’s fuel tank.

•Do not mix more than one month’s supply of fuel at a time.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

•This engine is certiﬁed to operate on unleaded gasoline.

WARNING! The catalytic converter mufﬂer

!gets very hot during and after use. This also applies during idling. Be aware of the ﬁre hazard, especially when working near ﬂammable substances and/or vapours.

14 – English

326L specifications

The Husqvarna 326L is a top-tier trimmer designed for professional landscapers and dedicated homeowners who seek power and efficiency in their garden tools. Known for its durable construction and advanced technology, the 326L exemplifies Husqvarna's commitment to producing high-quality outdoor equipment.

One of its standout features is the powerful 25cc two-stroke engine. This engine not only provides high performance but also ensures that the trimmer operates efficiently. The design minimizes vibrations, reducing operator fatigue during extended use, a critical advantage for professionals who spend long hours landscaping.

The 326L is equipped with a Smart Start system, which simplifies the starting process. This technology reduces the resistance in the starter cord by almost 40%, allowing the user to start the equipment with minimal effort. This feature is particularly beneficial for those who may struggle with traditional starting methods.

The trimmer's ergonomic design enhances user comfort. It features an adjustable handle that can be tailored to fit the user’s height and preference, allowing for optimal control during trimming tasks. The lightweight construction, combined with a balanced design, further improves maneuverability, making it easier to navigate through various terrains and obstacles.

Husqvarna has also integrated its patented T35 trimmer head into the 326L. This semi-automatic head allows for quick line feed, enabling users to quickly extend the cutting line without having to stop the machine. The T35 head is designed for efficiency, so users can focus on their work rather than dealing with frequent line replacements.

Durability is a key characteristic of the Husqvarna 326L. The trimmer is built with high-quality materials that resist wear and tear, making it suitable for heavy-duty use. The air filter system extends the life of the engine by keeping dirt and debris out, ensuring peak performance over time.

Another notable aspect is its versatility. The 326L can be equipped with various attachments, including brush blades and different types of cutting heads. This adaptability makes it suitable for a wide range of tasks, from trimming grass to clearing overgrown vegetation.

In conclusion, the Husqvarna 326L is an exceptional tool that combines power, efficiency, and longevity. Its features, including a powerful engine, user-friendly starting system, ergonomic design, and innovative cutting head, make it a valuable asset for anyone serious about lawn care and landscaping. With its proven technologies and robust construction, the Husqvarna 326L stands out as a reliable choice in the competitive market of string trimmers.