Husqvarna 325RJX-Series General safety instructions, Fuel safety, Start, Transport and storage

Page 10

SAFETY INSTRUCTIONS

General safety instructions

IMPORTANT INFORMATION

•The machine is only designed for trimming grass.

•The only accessories to be used with the engine unit as a drive source are the cutting units we recommend in the chapter “Technical data“.

•Never use the machine if you are tired, if you have consumed alcohol, or if you are taking medicines that can affect your sight, your judgement or the control of your body.

•Use personal protective equipment. See the section “Personal protective equipment“.

•Never use a machine that has been modified so that it no longer corresponds with the original design.

•Never use a machine that is faulty. Follow the maintenance, control and service instructions in this Operator‘s Manual. Some maintenance and service actions should be carried out by trained and qualified specialists. See the chapter “Maintenance“.

•All covers and guards must be fitted before starting the machine. Check that the spark plug cap and HT lead are not damaged, otherwise you could get an electric shock.

•The machine operator shall ensure, while working, that no persons or animals come closer than 15 metres (50 feet). When several operators are working in the same area the safety distance should be at least double tree length, however, at least 15 metres (50 feet).

!WARNING!

Faulty cutting equipment increases the risk of accidents.

Fuel safety

•Always use a fuel container with an anti-spill valve.

•Never fill the machine while the engine is running. Always stop the engine and let it cool for a few minutes before refuelling.

•Provide good ventilation when filling or mixing fuel (petrol and 2-stroke oil).

•Move the machine at least 3 m from the filling position before starting.

•Never start the machine:

a)If you have spilt fuel on it. Wipe up all spillage.

b)If you have spilt fuel on yourself or your clothes. Change your clothes.

c)If there is a fuel leak. Make regular checks for leakage from the fuel cap and the fuel supply pipes.

Min. 3 m

(10 ft)

Start

!WARNING!

When the engine is started with the choke in either the choke or start throttle positions the cutting equipment starts to rotate immediately.

•The complete clutch cover with shaft must be fitted before the machine is started, otherwise the clutch can become loose and cause personal injury.

•Never start the machine indoors. Bear in mind the dangers of inhaling the engine‘s exhaust fumes.

•Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

• Place the machine on the ground, ensure the cutting equipment runs free of twigs and stones. Push the machine body towards the ground using your left hand. (NOTE! Not with your foot). Grip the starter handle with your right hand and pull the startercord.

Transport and storage

•Store and transport the machine and fuel so that any leakage or fumes do not risk coming into contact with sparks or naked flames. For example, electric machines, electric motors, electrical switches/power switches, heaters or the like.

•When storing and transporting fuel approved containers intended for this purpose must be used.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out how to dispose of excess fuel.

!WARNING!

Exercise great care when handling fuel. Bear in mind the risk of fire, explosions and inhaling fumes.

10 – English

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 325RJ 101 91Symbols Symbol ExplanationMax 10000 rpm Contents Stop switch Safety InstructionsMachine‘s safety equipment Personal protective equipmentCutting attachment guard Vibration damping systemCutting equipment MufflerLocking nut Maintenance Safety Instructions Filing the grass blade Cutting equipmentTrimmer head Start General safety instructionsFuel safety Transport and storageGeneral working instructions Basic safety precautionsBrush cutting using a grass blade Basic working techniquesTrimming Grass trimming using the trimmer head and plastic knifesClearing SweepingWhat is WHAT? What is what on the trimmer?Assembling the J-handle AssemblyAssembly of the blade and trimmer head Assembling the spray guard and trimmer head SuperautoDismantling takes place in the reverse order Fuel mixture Fuel HandlingFuelling Control before starting Start and StopStart and stop Maintenance CarburettorFinal setting of the idling speed T High speed needle H Correctly adjusted carburettorMuffler Cooling system Spark plugAir filter Maintenance scheduleDaily maintenance Angle gearWeekly maintenance Monthly maintenanceTechnical Data Technical data 325RJ-XApproved accessories Type Cutting attachment guard Art NoSuper Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro 2,4 mm 080-.095 12 cm ~ 3,5 m Trimmy SII 502 26 ´*31@¶6E¨ English 2001W17

325RJX-Series specifications

The Husqvarna 325RJX-Series is designed for professionals and homeowners looking for a reliable and efficient tool for cutting grass, trimming hedges, and maintaining lawns. This series stands out due to its combination of power, maneuverability, and innovative features that cater to a variety of landscaping needs.

One of the primary characteristics of the 325RJX-Series is its robust engine, which delivers impressive performance while maintaining fuel efficiency. The series is equipped with a powerful 25cc two-stroke engine that ensures a reliable power supply, enabling users to tackle tough tasks without compromising on speed or effectiveness. The engine also utilizes Husqvarna’s advanced air injection technology, which helps to minimize air filtration clogging and extend the life of the engine.

The lightweight design of the 325RJX-Series further enhances its usability, making it easier for users to handle and transport. The ergonomic handle provides a comfortable grip, which is particularly beneficial during long periods of operation. Additionally, the balanced design reduces user fatigue, allowing for extended use without discomfort.

Another notable feature is the innovative Auto Return Stop Switch, which simplifies the starting process. After powering down the machine, the switch automatically resets to the "on" position, ensuring quick and effortless restarts when it's time to get back to work. This feature is especially useful for professional landscapers who need to maximize efficiency throughout the day.

The 325RJX-Series also boasts detachable and interchangeable cutting heads, allowing users to switch between a trimmer head and a blade with ease. This versatility makes it suitable for a variety of tasks, from trimming grass around flower beds to cutting through thick brush.

Additionally, this series incorporates vibration dampening technology, which minimizes fatigue by reducing the amount of vibration experienced by the user. This focus on user comfort and operational efficiency has made the 325RJX-Series popular among both professionals and home users.

In summary, the Husqvarna 325RJX-Series is a powerful, lightweight, and versatile trimming solution. With its advanced engine technology, ergonomic design, and innovative features, it is a top choice for anyone seeking to maintain their outdoor spaces effectively and efficiently. Whether for professional use or home landscaping, the 325RJX-Series delivers reliability and performance that users can depend on.
Top Page Image Contents