Husqvarna 325RJX-Series manual Air filter, Maintenance schedule, Angle gear, Daily maintenance

Page 21

MAINTENANCE

Air filter

The air filter should be cleaned regularly removing dust and dirt to avoid:

Maintenance schedule

Below follows some general maintenance instructions.

If you need further information please contact your service workshop.

•carburettor malfunction

•starting problems

•reduced engine power

•unnecessary wear to engine parts

•abnormal fuel consumption

Clean the filter after every 25 hours or more regularly if operating conditions are exceptionally dusty.

Cleaning the air filter

Dismantle the air filter cover and remove the air filter. Wash in clean, warm soapy water. Ensure that the filter is dry before refitting. An air filter used for a long period of time can never be cleaned completely. Therefore it is necessary to replace the filter from time to time with a new filter. A damaged air filter must always be replaced.

If the machine is used in dusty conditions the air filter should be soaked in oil, see the section on “Oiling the air filter“.

Oiling the air filter

Always use HUSQVARNA filter oil, order no. 503 47 73-01. The filter oil contains a solvent to make it spread evenly through the filter. You should therefore avoid skin contact. Put the filter in a plastic bag and the pour the filter oil over it. Knead the plastic bag to distribute the oil. Squeeze the excess oil out of the filter inside the plastic bag and pour off the excess before

fitting the filter on the machine. Never use common engine oil. This would drain through the filter quite quickly and collect in the bottom.

Angle gear

The angle gear is filled with a sufficient quantity of grease at the factory. However, before using the machine you should check that the angle gear is filled to 3/4 with grease. Use HUSQVARNA special grease.

Normally, the grease does not need to be changed except when repairs are carried out.

Daily maintenance

1.Clean the outside of the machine.

2.Make sure the throttle trigger lock and the throttle function correctly from a safety point of view.

3.Check that the stop switch functions.

4.Check that the cutting head does not rotate while idling.

5.Clean the air filter. Replace if necessary.

6.Check that the guard is undamaged and not cracked. Replace the guards if they have been exposed to impact or are cracked.

7.Check that the trimmer head is undamaged and not cracked. Replace the trimmer head if necessary.

8.Check that the locking nut is tight.

9.Check that all nuts and screws are tightened.

10.Make sure the harness is not damaged.

11.Check that the blade is well centred, is sharp, and is not cracked. An uncentred blade causes vibrations that can result in damage to the machine.

12.Check that the blade‘s transport guard is intact and that it can be secured correctly.

1

2

3

4

5

6

7

8

9

10

11

12

English – 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 101 91 325RJSymbol Explanation SymbolsMax 10000 rpm Contents Machine‘s safety equipment Safety InstructionsStop switch Personal protective equipmentVibration damping system Cutting attachment guardMuffler Cutting equipmentLocking nut Maintenance Safety Instructions Cutting equipment Filing the grass bladeTrimmer head Fuel safety General safety instructionsStart Transport and storageBrush cutting using a grass blade Basic safety precautionsGeneral working instructions Basic working techniquesClearing Grass trimming using the trimmer head and plastic knifesTrimming SweepingWhat is what on the trimmer? What is WHAT?Assembly of the blade and trimmer head AssemblyAssembling the J-handle Assembling the spray guard and trimmer head SuperautoDismantling takes place in the reverse order Fuel Handling Fuel mixtureFuelling Start and Stop Control before startingStart and stop Carburettor MaintenanceHigh speed needle H Correctly adjusted carburettor Final setting of the idling speed TSpark plug Muffler Cooling systemDaily maintenance Maintenance scheduleAir filter Angle gearMonthly maintenance Weekly maintenanceTechnical data 325RJ-X Technical DataCutting attachment guard Art No Approved accessories TypeSuper Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro 2,4 mm 080-.095 12 cm ~ 3,5 m Trimmy SII 502 26 ´*31@¶6E¨ English 2001W17

325RJX-Series specifications

The Husqvarna 325RJX-Series is designed for professionals and homeowners looking for a reliable and efficient tool for cutting grass, trimming hedges, and maintaining lawns. This series stands out due to its combination of power, maneuverability, and innovative features that cater to a variety of landscaping needs.

One of the primary characteristics of the 325RJX-Series is its robust engine, which delivers impressive performance while maintaining fuel efficiency. The series is equipped with a powerful 25cc two-stroke engine that ensures a reliable power supply, enabling users to tackle tough tasks without compromising on speed or effectiveness. The engine also utilizes Husqvarna’s advanced air injection technology, which helps to minimize air filtration clogging and extend the life of the engine.

The lightweight design of the 325RJX-Series further enhances its usability, making it easier for users to handle and transport. The ergonomic handle provides a comfortable grip, which is particularly beneficial during long periods of operation. Additionally, the balanced design reduces user fatigue, allowing for extended use without discomfort.

Another notable feature is the innovative Auto Return Stop Switch, which simplifies the starting process. After powering down the machine, the switch automatically resets to the "on" position, ensuring quick and effortless restarts when it's time to get back to work. This feature is especially useful for professional landscapers who need to maximize efficiency throughout the day.

The 325RJX-Series also boasts detachable and interchangeable cutting heads, allowing users to switch between a trimmer head and a blade with ease. This versatility makes it suitable for a variety of tasks, from trimming grass around flower beds to cutting through thick brush.

Additionally, this series incorporates vibration dampening technology, which minimizes fatigue by reducing the amount of vibration experienced by the user. This focus on user comfort and operational efficiency has made the 325RJX-Series popular among both professionals and home users.

In summary, the Husqvarna 325RJX-Series is a powerful, lightweight, and versatile trimming solution. With its advanced engine technology, ergonomic design, and innovative features, it is a top choice for anyone seeking to maintain their outdoor spaces effectively and efficiently. Whether for professional use or home landscaping, the 325RJX-Series delivers reliability and performance that users can depend on.
Top Page Image Contents