Husqvarna 225L/LD, 225L Lite Assembling the spray guard, Trimmer head Superauto Cutting equipment

Page 13

ASSEMBLY

Assembling the spray guard and

Assembling other guards and

trimmer head Superauto II

cutting equipment

• Fit the guard (A) intended

 

 

 

for use with the trimmer

 

 

 

head. Secure using the 4

 

 

 

bolts (L) and the support

 

 

 

plate (M) as set out in the

 

 

 

diagram.

 

K

 

 

 

•

Fit the drive disc (B) on the

 

J

 

output axle.

 

 

 

I

•

Turn the blade axle until

 

 

 

one of the holes in the

 

 

 

drive disc aligns with the

 

K

 

hole in the gear housing.

 

 

•

Insert the locking pin (C)

 

 

 

in the hole so that the axle

G

 

 

is locked.

F

B

 

I

 

 

 

 

C

• The trimmer head must be

M

 

 

split to be fitted (see the

L

 

 

diagram). Proceed as

 

 

 

follows:

 

 

•

Insert your finger into the

 

 

 

centre hole of the cover (I)

 

A

 

at the same time as you

 

 

 

 

 

hold the cover with your

 

 

 

other fingers. Press the two

 

 

 

catches (J) that extend from

 

 

 

the cut-out on the bottom

 

 

 

section (K) using the

 

 

 

thumb and index finger of

 

 

 

your other hand. Press

 

 

 

apart the trimmer head

 

 

 

using the fingers on the

 

 

 

cover.

 

 

•Place the cover (I) and the support flange (F) on the output axle.

•Fit the nut (G). The tightening torque of the nut is 35-50 Nm (3,5-5 kpm). Use the socket spanner in the tool kit.

Hold the handle of the

spanner as close to the trimmer guard as possible. The nut is tightened when the spanner is turned against the direction of rotation (left-hand thread).

•Fit the trimmer head‘s bottom section (K) on the cover (I) by pressing the two sections together with the cut-outs on the bottom section aligned with the catches on the cover.

•To dismantle follow the instructions in the reverse order.

•Fit the guard (A) intended for use with the trimmer head. Secure using four bolts

(L)and the support plate

(M)as shown in the diagram.

•Fit the disc drive (B) on the output axle.

•Turn the blade axle until one of the disc drive’s holes aligns with the corresponding hole in the gear housing.

•Insert the locking pin

(C)into the hole to lock the axle.

•Screw on the trimmer head (H) in the direction of rotation.

•Dismantling takes place in the reverse order.

A

L

B

 

 

 

 

 

C

M

 

 

 

H

 

English – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 101 89 225L/LD 225L Lite 232LSymbols Symbol ExplanationMax 10000 rpm Contents Machine‘s safety equipment Safety InstructionsPersonal protective equipment Muffler Vibration damping systemCutting Equipment Locking nutLock Throttle triggerTrimmer head Cutting equipmentFuel safety General safety instructionsStart Transport and storageGrass trimming using the trimmer head Basic safety precautionsGeneral working instructions Basic working techniquesTrimming ClearingSweeping What is what on the trimmer? What is WHAT?225L Lite AssemblyAssembling DismantlingTrimmer head Superauto Cutting equipment Assembling the spray guardFuel mixture Fuel HandlingFuelling Control before starting Start and StopStart and stop Carburettor MaintenanceCorrectly adjusted carburettor Final setting of the idling speed THigh speed needle Cooling system MufflerAir filter Angle gear Spark plugTwo-part shaft Daily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data 225L/LD 225L Lite 232L Technical Data«*2=5A¬ English «*2=5A¬

232L, 225L/LD, 225L Lite specifications

The Husqvarna 225L Lite, 225L/LD, and 232L are part of the coveted lineup of trimmers and brushcutters designed for professionals and serious homeowners alike. Known for their lightweight yet powerful design, these machines offer exceptional performance for maintaining gardens, parks, and lawns.

One of the standout features of these models is their lightweight construction. The 225L Lite, in particular, is engineered for reduced weight without compromising power, making it easy to maneuver during extended use. By minimizing fatigue, operators can work longer and more efficiently, tackling tougher tasks without the usual strain associated with heavier tools.

The Husqvarna 225L and 225L/LD come equipped with Smart Start technology, which simplifies the starting process. This system reduces resistance in the starter cord by nearly 40%, making it easier to start the engine with minimal effort. Coupled with a fuel pump that supplies the carburetor with fuel, these trimmers are ready to go quickly and smoothly, maximizing productivity.

Another key attribute of these machines is their Efficient Air Filter system. This feature ensures a longer lifespan for the engine by keeping the air intake clean. The centrifugal air cleaning system separates larger debris from the air before it enters the air filter, thereby extending the intervals between filter cleanings.

The 232L model is notable for its versatility, designed to accommodate various attachments that expand its functionality. This makes it ideal for various landscaping tasks, allowing operators to switch from trimming to edging effortlessly.

All three models are equipped with ergonomically designed handles and harnesses that enhance user comfort during operation. The adjustable handle enables users to find the optimal position for maximum control, ensuring precision while working.

Robust yet user-friendly, the Husqvarna 225L Lite, 225L/LD, and 232L deliver reliability and performance that can handle tough jobs. With features that prioritize ease of use, maintenance, and performance, these trimmers and brushcutters reflect Husqvarna's commitment to quality and innovation in outdoor power equipment, making them a solid choice for anyone looking to achieve a well-groomed landscape.
Top Page Image Contents