Husqvarna 232L Maintenance schedule, Daily maintenance, Weekly maintenance, Monthly maintenance

Page 20

MAINTENANCE

NOTE: Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator or others. Your warranty does not cover damage or liability caused by the use of accessories and/or attachments not specifically recommended by

HUSQVARNA.

Maintenance schedule

Below you will find some general maintenance instructions.

Daily maintenance

•Check throttle trigger and throttle trigger lockout function.

•Check stop switch function.

•Check that trimmer head does not rotate at idling.

•Clean the exterior of the saw.

•Check that the harness is undamaged.

•Check the spray guard for damage or cracks.

•Change the guard in case of impacts or cracks.

•Check the trimmer head for cracks and chips or damage. Replace if necessary.

•A non-balanced trimmer head induces heavy vibrations that may damage the saw.

•Check that the locking nut is sufficiently tightened.

•Check that nuts and screws are sufficiently tightened.

Weekly maintenance

•Check the starter, especially cord and return spring.

•Clean the carburettor area.

•Clean the exterior of the spark plug.

•Remove it and check the electrode gap.

•Adjust it to 0,5 mm (.020"), or change the spark plug.

•Clean the cooling fins on the cylinder and check that the air intake at the starter is not clogged.

•Check that the angle gear is filled with grease up to 3/4. Use special grease.

•Clean the air filter.

•Clean or replace the muffler’s spark arrest screen (not on mufflers with a catalytic coverter).

Monthly maintenance

•Clean the fuel tank.

•Clean the exterior of the carburettor and the space around it.

•Clean the fan and the space around it.

•Check fuel hose for cracks or other damage. Change if necessary.

•Change fuel filter in fuel tank.

•Check clutch, clutch spring and clutch drum for wear. Change if necessary.

•Check electrical wires and connections.

•Change the spark plug.

•Change the airfilter.

•Check and clean the muffler’s spark arrest screen if necessary (only mufflers with a catalytic converter).

20 – English

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 225L/LD 225L Lite 232L 101 89Max 10000 rpm Symbol ExplanationSymbols Contents Personal protective equipment Safety InstructionsMachine‘s safety equipment Vibration damping system MufflerCutting Equipment Locking nutThrottle trigger LockCutting equipment Trimmer headGeneral safety instructions Fuel safetyStart Transport and storageBasic safety precautions Grass trimming using the trimmer headGeneral working instructions Basic working techniquesSweeping ClearingTrimming What is WHAT? What is what on the trimmer?Assembly 225L LiteAssembling DismantlingAssembling the spray guard Trimmer head Superauto Cutting equipmentFuelling Fuel HandlingFuel mixture Start and stop Start and StopControl before starting Maintenance CarburettorHigh speed needle Final setting of the idling speed TCorrectly adjusted carburettor Air filter MufflerCooling system Two-part shaft Spark plugAngle gear Maintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceTechnical Data Technical data 225L/LD 225L Lite 232L«*2=5A¬ English «*2=5A¬

232L, 225L/LD, 225L Lite specifications

The Husqvarna 225L Lite, 225L/LD, and 232L are part of the coveted lineup of trimmers and brushcutters designed for professionals and serious homeowners alike. Known for their lightweight yet powerful design, these machines offer exceptional performance for maintaining gardens, parks, and lawns.

One of the standout features of these models is their lightweight construction. The 225L Lite, in particular, is engineered for reduced weight without compromising power, making it easy to maneuver during extended use. By minimizing fatigue, operators can work longer and more efficiently, tackling tougher tasks without the usual strain associated with heavier tools.

The Husqvarna 225L and 225L/LD come equipped with Smart Start technology, which simplifies the starting process. This system reduces resistance in the starter cord by nearly 40%, making it easier to start the engine with minimal effort. Coupled with a fuel pump that supplies the carburetor with fuel, these trimmers are ready to go quickly and smoothly, maximizing productivity.

Another key attribute of these machines is their Efficient Air Filter system. This feature ensures a longer lifespan for the engine by keeping the air intake clean. The centrifugal air cleaning system separates larger debris from the air before it enters the air filter, thereby extending the intervals between filter cleanings.

The 232L model is notable for its versatility, designed to accommodate various attachments that expand its functionality. This makes it ideal for various landscaping tasks, allowing operators to switch from trimming to edging effortlessly.

All three models are equipped with ergonomically designed handles and harnesses that enhance user comfort during operation. The adjustable handle enables users to find the optimal position for maximum control, ensuring precision while working.

Robust yet user-friendly, the Husqvarna 225L Lite, 225L/LD, and 232L deliver reliability and performance that can handle tough jobs. With features that prioritize ease of use, maintenance, and performance, these trimmers and brushcutters reflect Husqvarna's commitment to quality and innovation in outdoor power equipment, making them a solid choice for anyone looking to achieve a well-groomed landscape.
Top Page Image Contents