TECHNICAL DATA
Technical data | 225L/LD | 227L/LD | 232L |
Engine |
|
|
|
Cylinder capacity, cu. in/cm3 | 1,55/25,4 | 1,64/26,9 | 1,88/30,8 |
Cylinder bore, inch/mm | 1,34/34 | 1,38/35 | 1,38/35 |
Stroke length, inch/mm | 1,10/28 | 1,10/28 | 1,26/32 |
Recommended max. speed, rpm | 11 | 11 | 11 |
Idling speed, rpm | 2 700 | 2 700 | 2 700 |
Speed of output axle, rpm | 10 000 | 10 000 | 10 000 |
Max. engine output, acc. to ISO 8893 | 0,9 kW/ 9 000 rpm | 1,0 kW/ 9 000 rpm | 1,1 kW/ 8 400 rpm |
Catalytic converter muffler | Yes | Yes | Yes |
Yes | Yes | Yes | |
Ignition system |
|
|
|
Manufacturer/type of ignition system | Walbro CD | Walbro CD | Walbro CD |
Spark plug | Champion RCJ 7Y | Champion RCJ 7Y | Champion RCJ 7Y |
Electrode gap, inch/mm | 0,02/0,5 | 0,02/0,5 | 0,02/0,5 |
Fuel lubrication system |
|
|
|
Manufacturer/type of carburetor | Walbro WT | Walbro WT | Walbro WT |
Fuel tank capacity, US pint/litres | 1,06/0,5 | 1,06/0,5 | 1,06/0,5 |
Weight |
|
|
|
Weight without fuel, cutting tool and |
|
|
|
guard, Lbs/kg | 12,6/5,7 (LD 13,2/6,0) | 12,6/5,7 (LD 13,2/6,0) | 13,7/6,2 |
Noise levels |
|
|
|
Equivalent noise pressure level at the user’s |
|
|
|
ear, measured according to EN 11806 and |
|
|
|
ISO 7917, dB(A), min/max: | 95/99 | 92/97 | 92/100 |
Equivalent noise power level at the user’s |
|
|
|
ear, measured according to EN 11806 and |
|
|
|
ISO 10884, dB(A), min/max: | 104/109 | 103/109 | 107/110 |
Vibration levels |
|
|
|
Vibration levels on the handles, measured |
|
|
|
according to EN 11806 and ISO 7916, m/s |
|
|
|
When idling, left/right handles, min: | 2,7/2,0 | 3,0/2,8 | 2,5/2,3 |
When idling, left/right handles, max: | 2,8/2,7 | 3,5/4,0 | 4,0/3,0 |
At max. speed, left/right handles, min: | 2,6/2,8 | 2,6/3,5 | 3,8/2,8 |
At max. speed, left/right handles, max: | 5,0/5,0 | 4,6/5,1 | 6,8/3,4 |
NOTE!
Noise and vibration measurements are made with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.
Approved accessories | Type | Cutting attachment guard Art No. |
Thread blade shaft M10 | Tricut ∅ 300 mm |
|
Plastic knifes | 503 74 | |
Trimmer head | Trimmy H II | 503 74 |
| Trimmy Fix | 503 74 |
| Trimmy Hit | 503 74 |
| Trimmy Hit Pro | 503 74 |
| Superauto II | 503 74 |
Edger (LD) | Edger attachment ∅ 200 mm | - |
Hedge trimmer (LD) | Hedge trimmer attachment | - |
20 – English