|
| TECHNICAL DATA |
Technical data | 240L | |
Engine |
| |
Cylinder capacity, cu. in/cm3 | 2,21/36,3 | |
Cylinder bore, inch/mm | 1,50/38 | |
Stroke length, inch/mm | 1,26/32 | |
Recommended max. speed, rpm | 11 | |
Idling speed, rpm | 2 700 | |
Speed of output axle, rpm | 10 000 | |
Max. engine output, acc. to ISO 8893 | 1,3 kW/ 9 000 rpm | |
Catalytic converter muffler | Yes | |
Yes | ||
Ignition system |
| |
Manufacturer/type of ignition system | Walbro CD | |
Spark plug | Champion RCJ 7Y | |
Electrode gap, inch/mm | 0,02/0,5 | |
Fuel lubrication system |
| |
Manufacturer/type of carburetor | Walbro WT | |
Fuel tank capacity, US pint/litres | 1,06/0,5 | |
Weight |
| |
Weight without fuel, cutting tool and |
| |
guard, Lbs/kg | 13,9/6,3 | |
Noise levels |
| |
Equivalent noise pressure level at the user’s |
| |
ear, measured according to EN 11806 and |
| |
ISO 7917, dB(A), min/max: | 98/101 | |
Equivalent noise power level at the user’s |
| |
ear, measured according to EN 11806 and |
| |
ISO 10884, dB(A), min/max: | 106/106 | |
Vibration levels |
| |
Vibration levels on the handles, measured |
| |
according to EN 11806 and ISO 7916, m/s |
| |
When idling, left/right handles, min: | 4,0/3,8 | |
When idling, left/right handles, max: | 4,2/4,4 | |
At max. speed, left/right handles, min: | 6,4/7,4 | |
At max. speed, left/right handles, max: | 6,7/11,0 | |
NOTE!
Noise and vibration measurements are made with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.
Approved accessories | Type | Cutting attachment guard Art No. |
Thread blade shaft M10 | Tricut ∅ 300 mm |
|
Plastic knifes | 503 74 | |
Trimmer head | Trimmy H II | 503 74 |
| Trimmy Fix | 503 74 |
| Trimmy Hit | 503 74 |
| Trimmy Hit Pro | 503 74 |
| Superauto II | 503 74 |
Edger (LD) | Edger attachment ∅ 200 mm | - |
Hedge trimmer (LD) | Hedge trimmer attachment | - |
English – 21