Assembly, Assembling the J-handle | Husqvarna 123L manual

ASSEMBLY

Assembling the J-handle

!WARNING

Only grass blades or trimmer heads/ plastic blades may be used when the J- handle is fitted. Clearing blades must never be used with the J-handle.

•Clip the loop handle onto

the shaft. Note that the loop handle must be fitted between the arrows on the shaft.

• Slide the spacer into the slot in the loop handle.

• Fit the nut, bolt and knob. Do not overtighten.

• Attach the J-handle to the loop handle using the three screws, as shown.

• Now adjust the trimmer to give a comfortable working position. Tighten

Assembly of the blade and trimmer head

It is extremely important that the disc drive’s/support flange’s guide engages correctly in the cutting equipment’s centre hole when assembling the cutting equipment. Cutting equipment assembled incorrectly can result in serious and/or fatal personal injury.

!WARNING!

Under no circumstances may the cutting equipment be used without an approved guard fitted. See the chapter “Technical data”. If the wrong guard or a defective guard is fitted this can cause serious personal injury.

Do not attach any blade to the unit without proper installation of all required parts. Failure to use the proper parts can cause the blade to fly off and seriously injure the operator and/or bystanders.

Fitting the combination guard, grass blade and grass knife

the bolt/knob.

Fitting the suspension ring

Fit the suspension ring between the rear handle and the loop handle. Position the suspension ring so that the machine is balanced and comfortable to work with.

•Hook the guard (A) onto the bracket on the shaft and secure with 1 bolt. NOTE! Use the recommended blade guard. “See Technical data“.

•Fit the drive disc (B) on the output axle.

•Turn the blade axle until one of the holes in the drive disc aligns with the hole in the gear housing.

•Insert the locking pin (C) in the hole so that the axle is locked.

•Place the blade (D), support cup (E) and support flange (F) on the output axle.

•Fit the nut (G). The tightening torque of the nut is 35-50 Nm (3,5 - 5 kpm). Use the socket spanner in the tool kit. Hold the handle of the spanner as close to the blade guard as possible. The nut is tightened when the spanner is turned against the direction of rotation (left-hand thread).

	G
	F
	E
	D
A	B
	B
	C

English – 5

123L specifications

The Husqvarna 123L is a lightweight and efficient trimmer designed for homeowners and garden enthusiasts seeking a reliable tool for trimming grass and managing tough weeds. It combines power, usability, and innovativeness, making it an ideal choice for maintaining residential landscapes.

At the heart of the Husqvarna 123L is a powerful 28cc two-stroke engine that delivers impressive performance while remaining lightweight. This engine is designed for optimal fuel efficiency, enabling users to work longer without frequent refueling. The low-emission technology incorporated into the engine ensures that it meets strict environmental standards, reducing the impact on the surrounding ecosystem.

One of the standout features of the Husqvarna 123L is its Smart Start technology. This innovation simplifies the starting process, allowing users to start the trimmer with minimal effort. The engine is designed to reduce resistance in the starter cord, enabling an easier pull every time. This attribute is particularly useful for those unfamiliar with small engine operation or for users who may have physical limitations.

The trimmer's ergonomically designed handle contributes to its comfort and usability. The adjustable handle allows for customization to fit the user's height and preferred operation angle, which reduces fatigue during extended use. Additionally, the trimmer features a lightweight construction, making it easy to maneuver around gardens and landscapes.

Another impressive characteristic of the Husqvarna 123L is its efficient cutting system. It comes equipped with a 0.080-inch cutting line, which provides a clean cut while ensuring durability for improved longevity. The trimmer head allows for easy line replacement, enabling users to quickly resume work without wasting time on complicated maintenance.

Moreover, the Husqvarna 123L is equipped with a heavy-duty, durable casing, ensuring that it withstands tough working conditions while providing consistent performance. The built-in air filter reduces contamination and prolongs the life of the engine, ensuring reliability with every use.

In summary, the Husqvarna 123L is an ideal choice for homeowners who need a powerful yet manageable trimmer. With its effective 28cc engine, Smart Start technology, ergonomic design, and efficient cutting system, this trimmer proves to be a valuable addition to any garden tool collection. Its commitment to power, comfort, and innovation allows users to maintain their landscapes effortlessly.