Char-Broil 415.9011211, 466224611 manual Assembly

ASSEMBLY

1

Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A. Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front. After all 4 casters are secure remove the Bent U Pin and save for future maintenance.

Non-lock caster

Locking caster

Front

Bottom shelf

Bent U pin

Qty.1

A

Bent U pin

Rear

2	Attach side panels to bottom shelf using
	three 1/4-20x1/2” screws, 7mm lock

washers, and 7mm flat washers per panel. IMPORTANT: Panel with large hole must be on left side of bottom shelf.

Left side panel (with large hole)

Make sure side panels are pushed as far to the rear of bottom shelf as possible before fully tightening screws.

	1/4-20x1/2” screw
1/4-20x1/2” screw
Qty.6	7mm lock washer
7mm lock washer	7mm flat washer
Qty.6
7mm flat washer
Qty.6

Right side panel

Magnets 13