Char-Broil 466224611 Rear, Front, #8x3/8” self-tapping screw Qty.3, Cart lower back panel, Qty.4

12 Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and facing the front. Secure using two 1/4-20x1½”screws, 7mm lock washers, and 7mm flat washers on each side.

7mm Lock washer	7mm flat washer
Qty.4	Qty.4
1/4-20x1½” screw	Door
	Hinge Pin
Qty.4

7mm flat	7mm lock	1/4-20x1½”
washer	washer	screw

Front brace

13 Inside of cart, insert rear shield into left slot(#1) on top of lower back panel. Insert left grease tray rail into slot(#2) beneath grease tray opening in upper back panel, shown A. Attach front shield and left grease tray rail under front brace(#4 and #5) with two #8x3/8” self-tapping screws, shown B. Insert right grease tray rail into slot(#3) and attach it under front brace(#6) with one #8x3/8” self-tapping screws, shown A/B.

Rear	Tank heat shield
	*This side UP

Tank heat shield

Front

Note: some parts omitted for clarity of illustration

A

#8x3/8” self-tapping screw Qty.3

B

Front	Brace	#6
	#5

Cart lower back panel

#4

#1 #2 #3

Left rail

Right rail

Tank heat shield

#8x3/8”

self-tapping screw

Right rail

Left rail

Grease tray opening

20