Husqvarna 323C manual Technical data 325Lx 325LDx Engine

TECHNICAL DATA

Technical data	325Lx	325LDx
Engine
Cylinder volume, cu.in/cm3	1,50/24,5	1,50/24,5
Cylinder bore, inch/mm	1,34/34	1,34/34
Stroke, inch/mm	1,06/27	1,06/27
Idle speed, rpm	2700	2700
Recommended max. speed, rpm	11000-11700	10000-10500
Speed of output shaft, rpm	8014	8014
Max. engine output, acc. to ISO 8893, kW/ r/min	0,9/9000	0,9/9000
Catalytic converter muffler	Yes	Yes
Speed-regulated ignition system	No	Yes
Ignition system
Manufacturer/type of ignition system	WalbroMB/SEM	WalbroMB/SEM
	AM49	AM49
Spark plug	Champion RCJ 7Y	Champion RCJ 7Y
Electrode gap, inch/mm	0,02/0,5	0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburettor	Zama C1Q	Zama C1Q
Fuel tank capacity, US pint/litre	1,06/0,5	1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 9,0/4,1		9,7/4,4
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear,
measured according to ANSI B175.3-1997, dB(A), min/	92/98	90/98
max:
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3-1997, m/s2
At idle, left/right handles, min.:	1,5/1,4	1,5/1,4
At idle, left/right handles, max.:	2,0/1,8	2,4/2,2
At max. speed, left/right handles, min.:	2,5/4,8	2,5/4,8
At max. speed, left/right handles, max.:	4,9/8,0	5,8/7,6

Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various

working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

24 – English