Husqvarna 325HD60, 325HD60X-Series, 325HD75X-Series manual Fuelling

Page 13

FUEL HANDLING

Fuelling

WARNING! Taking the following precautions,

!will lessen the risk of fire:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refuelling. Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently. Tighten the fuel cap carefully after refuelling. Always move the machine away from the refuelling area before starting.

Clean the area around the fuel cap. Contamination in the tank can cause operating problems.

Ensure that the fuel is well mixed by shaking the container before filling the tank.

English – 13

Image 13
Contents 323HD60 325HD60X-SERIES Symbols KEY to SymbolsContents Machine′s safety equipment Safety InstructionsStop switch Personal protective equipmentVibration damping system Hand guardMuffler Cutter guardSafety Instructions Blades Gear housingFuel safety General safety precautionsStarting Transport and storageSafety instructions regarding the surroundings Safety instructions when using the hedge trimmerSafety instructions while working Personal protectionBasic working techniques Safety instructions after completing workWhat is what? What is WHAT?Fuel Fuel HandlingGasoline Two-stroke oilFuelling Check before starting Starting and StoppingStarting and stopping Cold engineStopping Warm engineCarburettor MaintenanceCorrectly adjusted carburettor Fine adjustment of the idle speed THigh speed jet H Cooling system MufflerAir filter Cleaning and lubrication Gear housingCleaning the air filter Spark plugDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenance Technical data Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty Statement1140180-95