Contents

Contents
KEY TO SYMBOLS
Symbols	2
CONTENTS
Contents	3
Note the following before starting:	3
SAFETY INSTRUCTIONS
Personal protective equipment	4
Machine′s safety equipment	4
Checking, maintaining and servicing the machine′s
safety equipment	6
General safety precautions	8
Safety instructions when using the hedge trimmer	9
WHAT IS WHAT?
What is what?	11
FUEL HANDLING
Fuel	12
Fuelling	13
STARTING AND STOPPING
Check before starting	14
Starting and stopping	14
MAINTENANCE
Carburettor	16
Mufﬂer	18
Cooling system	18
Air ﬁlter	18
Spark plug	19
Gear housing	19
Cleaning and lubrication	19
Maintenance schedule	20
TECHNICAL DATA
Technical data	22
FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS	23

Note the following before starting:

Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.

WARNING! Under no circumstances may the

!design of the machine be modiﬁed without the permission of the manufacturer. Always use genuine accessories. Non-authorized modiﬁcations and/or accessories can result in serious personal injury or the death of the operator or others.

Your warranty may not cover damage or liability caused by the use of non-authorized accessories or replacement parts.

WARNING! Incorrect or careless use of a

!hedge trimmer can turn it into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand the contents of this operator’s manual.

The Emissions Compliance Period referred to on the Emission Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emissions requirements. Category C = 50 hours, B = 125 hours, and A = 300 hours.

For customer assistance call: 704-921-7000 or contact us at

our website: www.husqvarna.com

English – 3