Husqvarna 322R manual Cutting equipment

Page 9

SAFETY INSTRUCTIONS

6. Cutting equipment

This section describes how through correct maintenance and through using the right type of cutting equipment you can:

Reduce the machine‘s tendency to kickback

Obtain maximum cutting capacity.

Increase the service life of the cutting equipment.

Four basic rules:

1)Only use the cutting and guard equipment we recommend! See chapter “Technical data“.

2)Keep the blade‘s teeth well and correctly sharpened! Follow our instructions and use the recommended filing gauge. An incorrectly sharpened or damaged blade increases the risk of an accident.

3)Keep the correct setting. Follow our instructions and use the recommended setting tool. An incorrectly set blade increases the risk of jamming and kickback.

4)Check the cutting equipment with regard to damage and crack formation. Damaged cutting equipment should always be replaced.

7. Quick-release

• Check that the harness straps are correctly positioned. When the harness and machine are adjusted, check the harness‘ safety release catch to ensure it works correctly.

8. Locking nut

• Protect your hand from injury when assembling, use the blade guard as protection when tightening with a socket spanner. Tighten the nut by turning against the direction of rotation. Loosen the nut by turning in the direction of rotation. (NOTE! the nut has a left-hand thread).

Tighten the nut using a socket spanner, 35 - 50 Nm (3.5 - 5 kpm).

NOTE!

The locking nut‘s nylon lock must not be so worn that it can be turned by hand. The lock shall hold at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

!WARNING!

Never use a machine with defective safety equipment. The safety equipment should be maintained as described in this section. If your machine does not meet any of these controls you should contact your service workshop.

English – 9

Image 9
Contents 101 91 72 322R 325R-X/R-XTSymbols Symbol ExplanationContents Machine‘s safety equipment Safety InstructionsPersonal protective equipment Throttle trigger lockCutting attachment guard Stop switchAnti-vibration system Quick-releaseCutting equipment MufflerLocking nut Clearing blades are intended for cutting woodThrottle trigger lock Vibration damping system Cutting equipment Sharpening Cutting equipmentGrass blade Trimmer headFuel safety General safety instructionsStart Transport and storageGeneral working instructions Basic safety precautionsAdjusting the harness and clearing saw Basic clearing techniquesDesignations Brush cutting using the saw blade Grass clearing using a grass bladeClearing‘s ABC Working methodsClearing Grass clearing using the trimmer head and plastic bladesTrimming SweepingWhat is what on the brushcutter? What is WHAT?Assembling the handlebars 322R AssemblyAssembling the handlebars 325R-X/ R-XT Transport position, handlebars 325R-X/R-XTGrass blade Guard. See Technical DataFit the appropriate guard Assembling and dismantling the two-part shaft 325R-XT Adjusting the harness and clearing sawAssembling DismantlingFuel Handling Fuel mixtureFuelling Start and Stop Control before startingStart and stop Carburetor MaintenanceFinal setting of the idling speed T Correctly adjusted carburetorHigh speed needle Cooling system MufflerAngle gear Two-part shaftAir filter Spark plug Filing the grass bladeOiling the air filter Daily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data 322R 325R-X Technical DataType Cutting attachment Guard Art No Approved accessories 325R-X/R-XT Type Cutting attachmentCentre hole in blades Ø 25,4 mm Guard Ref NoYour Warranty Rights Obligations Emission Control Warranty StatementSuper Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro 2,4 mm 080-.095 12 cm ~ 3,5 m ~ 15 cm ´*31=¶53¨ 502 26 2001W16

322R specifications

The Husqvarna 322R is a versatile and efficient brushcutter designed for extensive use in both residential and professional applications. This powerful piece of equipment is known for its reliable performance, ergonomic design, and cutting-edge features that make yard maintenance tasks more manageable.

One of the standout features of the Husqvarna 322R is its robust 2-stroke engine, which delivers ample power while ensuring fuel efficiency. The engine is engineered to provide consistent performance, allowing users to tackle tough overgrowth with ease. The model comes with an impressive displacement, which translates to enhanced torque and cutting power, enabling operators to handle a variety of tasks ranging from trimming grass to clearing dense vegetation.

The design and ergonomics of the 322R are engineered with the user in mind. It features an adjustable handle that enhances comfort during prolonged use, minimizing fatigue and allowing for greater precision in operating angles. Additionally, it has a lightweight construction that makes it easy to maneuver without sacrificing durability. The harness system is also ergonomically designed to evenly distribute weight, providing optimal balance for the user.

In terms of technology, the 322R incorporates advanced features such as Smart Start™, which enables the engine to start with minimal effort. This innovative technology reduces the resistance in the starter cord, making it easier for users to start the equipment even after extended periods of inactivity. The trimmer is also equipped with an auto-return stop switch, which ensures that the switch automatically resets to the "on" position, allowing for more convenient starting and eliminating unnecessary downtime.

The Husqvarna 322R features a heavy-duty cutting head designed for durability and efficiency. The double-line cutting system delivers a clean and efficient cut, making it suitable for tackling thicker grass and weeds without bogging down. This brushcutter can accommodate various types of cutting attachments, expanding its versatility for different applications.

In addition to its powerful performance and advanced features, the Husqvarna 322R is built with a commitment to sustainability. The engine meets strict emission standards, reducing its environmental impact while delivering high performance.

In summary, the Husqvarna 322R is an exceptional brushcutter that combines power, ergonomic design, and advanced technology. It’s an ideal tool for homeowners and professionals alike, delivering outstanding results for all types of cutting tasks while ensuring comfort and ease of use. Whether clearing brush or maintaining a tidy lawn, the 322R excels in performance and reliability.