Husqvarna 322R manual Fit the appropriate guard

Page 19

ASSEMBLY

Assembling the spray guard and trimmer head Superauto II

Assembling other guards and cutting equipment

•Fit the appropriate guard

(A)for use with the trimmer head. Hook the guard onto the shaft fitting and secure it with the bolt

•Fit the drive disc (B) on the output axle.

•Turn the blade axle until one of the holes in the drive disc aligns with the hole in the gear housing.

•Insert the locking pin (C) in the hole so that the axle is locked.

•The trimmer head must be split to be fitted (see the diagram). Proceed as follows:

•Insert your finger into the centre hole of the cover (I) at the same time as you hold the cover with your other fingers. Press the two catches (J) that extend from the cut-out on the bottom section (K) using the thumb and index finger of your other hand. Press apart the trimmer head using the fingers on the cover.

•Place the cover (I) and the support flange (F) on the output axle.

•Fit the nut (G). The tightening torque of the nut is 35-50 Nm (3,5-5 kpm). Use the socket spanner in the tool kit. Hold the handle of the spanner as close to the trimmer guard as possible. The nut is tightened when the spanner is turned against the direction of rotation (left-hand thread).

•Fit the trimmer head‘s bottom section (K) on the cover (I) by pressing the two sections together with the cut-outs on the bottom section aligned with the catches on the cover.

•To dismantle follow the instructions in the reverse order.

 

K

 

J

 

I

 

K

G

 

F

B

I

C

 

 

A

•Fit the appropriate

guard (A) for use with the trimmer head. Hook the guard onto the shaft fitting and secure it with the bolt (L).

•Fit the disc drive (B) on the output axle.

•Turn the blade axle until one of the disc drive’s holes aligns with the

corresponding hole in

H

 

the gear housing.

 

•Insert the locking pin

(C) into the hole to lock the axle.

• Screw on the trimmer head (H) in the direction of rotation.

•Dismantling takes place

in the reverse order.

English – 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 101 91 72 322R 325R-X/R-XTSymbols Symbol ExplanationContents Throttle trigger lock Safety InstructionsMachine‘s safety equipment Personal protective equipmentQuick-release Stop switchCutting attachment guard Anti-vibration systemClearing blades are intended for cutting wood MufflerCutting equipment Locking nutThrottle trigger lock Vibration damping system Cutting equipment Trimmer head Cutting equipmentSharpening Grass bladeTransport and storage General safety instructionsFuel safety StartGeneral working instructions Basic safety precautionsBasic clearing techniques Adjusting the harness and clearing sawDesignations Working methods Grass clearing using a grass bladeBrush cutting using the saw blade Clearing‘s ABCSweeping Grass clearing using the trimmer head and plastic bladesClearing TrimmingWhat is what on the brushcutter? What is WHAT?Transport position, handlebars 325R-X/R-XT AssemblyAssembling the handlebars 322R Assembling the handlebars 325R-X/ R-XTGrass blade Guard. See Technical DataFit the appropriate guard Dismantling Adjusting the harness and clearing sawAssembling and dismantling the two-part shaft 325R-XT AssemblingFuel mixture Fuel HandlingFuelling Control before starting Start and StopStart and stop Carburetor MaintenanceCorrectly adjusted carburetor Final setting of the idling speed THigh speed needle Two-part shaft MufflerCooling system Angle gearFiling the grass blade Air filter Spark plugOiling the air filter Monthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data 322R 325R-X Technical DataGuard Ref No Approved accessories 325R-X/R-XT Type Cutting attachmentType Cutting attachment Guard Art No Centre hole in blades Ø 25,4 mmYour Warranty Rights Obligations Emission Control Warranty StatementSuper Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro 2,4 mm 080-.095 12 cm ~ 3,5 m ~ 15 cm ´*31=¶53¨ 502 26 2001W16

322R specifications

The Husqvarna 322R is a versatile and efficient brushcutter designed for extensive use in both residential and professional applications. This powerful piece of equipment is known for its reliable performance, ergonomic design, and cutting-edge features that make yard maintenance tasks more manageable.

One of the standout features of the Husqvarna 322R is its robust 2-stroke engine, which delivers ample power while ensuring fuel efficiency. The engine is engineered to provide consistent performance, allowing users to tackle tough overgrowth with ease. The model comes with an impressive displacement, which translates to enhanced torque and cutting power, enabling operators to handle a variety of tasks ranging from trimming grass to clearing dense vegetation.

The design and ergonomics of the 322R are engineered with the user in mind. It features an adjustable handle that enhances comfort during prolonged use, minimizing fatigue and allowing for greater precision in operating angles. Additionally, it has a lightweight construction that makes it easy to maneuver without sacrificing durability. The harness system is also ergonomically designed to evenly distribute weight, providing optimal balance for the user.

In terms of technology, the 322R incorporates advanced features such as Smart Start™, which enables the engine to start with minimal effort. This innovative technology reduces the resistance in the starter cord, making it easier for users to start the equipment even after extended periods of inactivity. The trimmer is also equipped with an auto-return stop switch, which ensures that the switch automatically resets to the "on" position, allowing for more convenient starting and eliminating unnecessary downtime.

The Husqvarna 322R features a heavy-duty cutting head designed for durability and efficiency. The double-line cutting system delivers a clean and efficient cut, making it suitable for tackling thicker grass and weeds without bogging down. This brushcutter can accommodate various types of cutting attachments, expanding its versatility for different applications.

In addition to its powerful performance and advanced features, the Husqvarna 322R is built with a commitment to sustainability. The engine meets strict emission standards, reducing its environmental impact while delivering high performance.

In summary, the Husqvarna 322R is an exceptional brushcutter that combines power, ergonomic design, and advanced technology. It’s an ideal tool for homeowners and professionals alike, delivering outstanding results for all types of cutting tasks while ensuring comfort and ease of use. Whether clearing brush or maintaining a tidy lawn, the 322R excels in performance and reliability.
Top Page Image Contents