Husqvarna 24C instruction manual Operator Safety, Unit / Maintenance Safety, Fuel Safety

Page 3

WARNING: When using gardening appliances, basic safety precautions should al- ways be followed to reduce the risk of fire and serious injury. Read and follow all instructions.

This power unit can be dangerous! Operator is

responsible for following instructions and warn- ings on unit and in manual. Read entire instruc- tion manual before using unit! Be thoroughly fa- miliar with the controls and the proper use of the unit. Restrict the use of this unit to persons who read, understand, and follow instructions and warnings on unit and in manual. Never allow children to operate this unit.

INSTRUCTION

SAFETY INFORMATION

MANUAL

ON THE UNIT

DANGER: Never use blades, wire, or flailing devices. This unit is designed for line trimmer use only. Use of any other accessories or attachments will increase the risk of injury.

WARNING: Trimmer line throws ob- jects violently. You and others can be blinded/ injured. Wear safety glasses and leg protec- tion. Keep body parts clear of rotating line.

Safety Glasses or similar eye protection

 

 

 

Hazard Zone

 

Boots

15 meters

 

 

Keep children, bystanders, and animals 15 me- ters away. If approached stop unit immediately. If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your authorized service dealer.

OPERATOR SAFETY

S Dress properly. Always wear safety glasses or similar eye protection when op- erating, or performing maintenance, on your unit (safety glasses are available). Eye protection should be marked Z87.

SAlways wear face or dust mask if operation

is dusty.

S Always wear heavy, long pants, long sleeves, boots, and gloves. Wearing safety leg guards is recommended.

S Always wear foot protection. Do not go barefoot or wear sandals. Stay clear of spinning line.

SSecure hair above shoulder length. Secure or remove loose clothing or clothing with loosely hanging ties, straps, tassels, etc. They can be caught in moving parts.

SBeing fully covered also helps protect you

from debris and pieces of toxic plants thrown by spinning line.

SStay Alert. Do not operate this unit when you are tired, ill, upset or under the influence of al-

cohol, drugs, or medication. Watch what you are doing; use common sense.

SWear hearing protection.

SNever start or run inside a closed room or building. Breathing exhaust fumes can kill.

SKeep handles free of oil and fuel.

UNIT / MAINTENANCE SAFETY

S Disconnect the spark plug before performing maintenance except carburetor adjustments.

S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep in good working condition.

S Replace trimmer head parts that are chipped, cracked, broken, or damaged in any other way before using the unit.

S Maintain unit according to recommended procedures. Keep cutting line at proper length.

S Use only 2 mm diameter Husqvarna! brand line. Never use wire, rope, string, etc.

S Install required shield properly before using the unit. Use only specified trimmer head; make sure it is properly installed and se- curely fastened.

S Make sure unit is assembled correctly as shown in this manual.

S Make carburetor adjustments with lower end supported to prevent line from contact- ing any object.

S Keep others away when making carburetor adjustments.

S Use only recommended Husqvarna! ac- cessories and replacement parts.

S Have all maintenance and service not ex- plained in this manual performed by an au- thorized service dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills. S Move at least 3 meters away from fueling

site before starting engine.

S Stop engine and allow to cool before re- moving fuel cap.

S Always store gasoline in a container ap- proved for flammable liquids.

3

Image 3
Contents Español EnglishFrançais DeutschON/OFF Operator Safety Unit / Maintenance SafetyFuel Safety Attaching the Shield Cutting SafetyAdjusting the Handle Transporting and StorageStarting a Warm Engine HOW to Stop Your UnitHOW to Start Your Unit Fueling EngineCutting Methods Starting a Flooded EngineOperating Instructions Operating Position Trimmer Line AdvanceCheck for Damaged or Worn Parts Inspect and Clean Unit and LabelsClean AIR Filter Check for Loose Fasteners and PartsEngine Carburetor AdjustmentReplacing the Line Seasonal StorageOther Troubleshooting Table Cause RemedyTexarkana Michael S. Bounds, Director Safety and Standards Noise Levels Octave Band Analysis 100-10000hz 1/3 Octave 2003MANUFACTURER’S Address Husqvarna Gardening Tools Direct

24C specifications

The Husqvarna 24C is a robust and versatile string trimmer designed for both professionals and homeowners. Known for its performance and reliability, this tool is particularly popular among landscape maintenance professionals who require a durable and efficient solution for trimming grass and weeds in a variety of environments.

One of the standout features of the Husqvarna 24C is its powerful 27cc engine. This two-stroke engine combines high efficiency with low emissions, meeting strict environmental standards without compromising on performance. The engine's design provides strong torque, allowing for effective cutting through thick grass and weeds with ease. Additionally, the Easy Start technology minimizes pull force for starting, making it user-friendly.

The 24C is equipped with a patented, efficient T35 bump feed head. This feature allows users to reload cutting line quickly and easily, minimizing downtime involved with line replacement. With a cutting width of 18 inches, the trimmer provides a wide swath for improved efficiency, making it suitable for large lawns and commercial properties.

Comfort and ergonomics are prioritized in the design of the Husqvarna 24C. The trimmer features adjustable handles that can be tailored to the user’s height, reducing fatigue during prolonged use. The lightweight construction of the tool further enhances maneuverability, allowing users to operate in tight spaces without straining.

Another notable characteristic is the anti-vibration system integrated into the handle and engine. This technology significantly reduces vibrations during operation, ensuring less discomfort for the user over extended periods. This is particularly beneficial for professional landscapers who rely on these tools for daily use.

The 24C also features a protective guard that shields the operator from debris and other hazards. This safety feature, along with durable construction materials, ensures that the trimmer can withstand the rigors of tough landscaping tasks.

In summary, the Husqvarna 24C is a top-tier string trimmer that offers a blend of power, efficiency, and user comfort. Its advanced technologies, including the Easy Start system and anti-vibration capabilities, along with its robust design, make it a preferred choice for those seeking reliability and performance in their lawn care arsenal. Whether you are a homeowner or a landscaping professional, the 24C is built to meet your trimming needs effectively.