Husqvarna 24C Check for Loose Fasteners and Parts, Check for Damaged or Worn Parts

Page 7

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screw S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SON/OFF Switch -- Ensure ON/OFF func- tions properly by moving the switch to the OFF position. Make sure engine stops;

then restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1. Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2. Remove parts as illustrated.

NOTE: Do not clean filter in gasoline or other flammable solvent to avoid creating a fire haz- ard or producing harmful evaporative emis- sions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze the filter to distribute oil.

6.Replace parts.

Air Filter

Screws

Air Filter

Cover

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0,6 mm. Ignition timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 19 mm socket wrench.

4.Reinstall the spark plug boot.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Español EnglishFrançais DeutschON/OFF Unit / Maintenance Safety Operator SafetyFuel Safety Attaching the Shield Cutting SafetyAdjusting the Handle Transporting and StorageStarting a Warm Engine HOW to Stop Your UnitHOW to Start Your Unit Fueling EngineCutting Methods Starting a Flooded EngineOperating Instructions Operating Position Trimmer Line AdvanceCheck for Damaged or Worn Parts Inspect and Clean Unit and LabelsClean AIR Filter Check for Loose Fasteners and PartsEngine Carburetor AdjustmentReplacing the Line Seasonal StorageOther Troubleshooting Table Cause RemedyTexarkana Michael S. Bounds, Director Safety and Standards 2003 Noise Levels Octave Band Analysis 100-10000hz 1/3 OctaveMANUFACTURER’S Address Husqvarna Gardening Tools Direct

24C specifications

The Husqvarna 24C is a robust and versatile string trimmer designed for both professionals and homeowners. Known for its performance and reliability, this tool is particularly popular among landscape maintenance professionals who require a durable and efficient solution for trimming grass and weeds in a variety of environments.

One of the standout features of the Husqvarna 24C is its powerful 27cc engine. This two-stroke engine combines high efficiency with low emissions, meeting strict environmental standards without compromising on performance. The engine's design provides strong torque, allowing for effective cutting through thick grass and weeds with ease. Additionally, the Easy Start technology minimizes pull force for starting, making it user-friendly.

The 24C is equipped with a patented, efficient T35 bump feed head. This feature allows users to reload cutting line quickly and easily, minimizing downtime involved with line replacement. With a cutting width of 18 inches, the trimmer provides a wide swath for improved efficiency, making it suitable for large lawns and commercial properties.

Comfort and ergonomics are prioritized in the design of the Husqvarna 24C. The trimmer features adjustable handles that can be tailored to the user’s height, reducing fatigue during prolonged use. The lightweight construction of the tool further enhances maneuverability, allowing users to operate in tight spaces without straining.

Another notable characteristic is the anti-vibration system integrated into the handle and engine. This technology significantly reduces vibrations during operation, ensuring less discomfort for the user over extended periods. This is particularly beneficial for professional landscapers who rely on these tools for daily use.

The 24C also features a protective guard that shields the operator from debris and other hazards. This safety feature, along with durable construction materials, ensures that the trimmer can withstand the rigors of tough landscaping tasks.

In summary, the Husqvarna 24C is a top-tier string trimmer that offers a blend of power, efficiency, and user comfort. Its advanced technologies, including the Easy Start system and anti-vibration capabilities, along with its robust design, make it a preferred choice for those seeking reliability and performance in their lawn care arsenal. Whether you are a homeowner or a landscaping professional, the 24C is built to meet your trimming needs effectively.
Top Page Image Contents