Husqvarna 245 RX General safety instructions, Start Fuel safety, Transport and storage, 10 ft

Page 11

SAFETY INSTRUCTIONS

General safety instructions

IMPORTANT INFORMATION

•The machine is only designed for trimming grass, brush cutting and/or forestry clearing.

•The only accessories to be used with the engine unit as a drive source are the cutting units we recommend in the chapter “Technical data“.

•Never use the machine if you are tired, if you have consumed alcohol, or if you are taking medicines that can affect your sight, your judgement or the control of your body.

•Use personal protective equipment. See the section “Personal protective equipment“.

•Never use a machine that has been modified so that it no longer corresponds with the original design.

•Never use a machine that is faulty. Follow the maintenance, control and service instructions in this Operator‘s Manual. Some maintenance and service actions should be carried out by trained and qualified specialists. See the chapter “Mainte- nance“.

•All covers and guards must be fitted before starting the machine. Check that the spark plug cap and HT lead are not damaged, otherwise you could get an electric shock.

•The machine operator shall ensure, while working, that no persons or animals come closer than 15 metres (50 feet). When several operators are working in the same area the safety distance should be at least double tree length, however, at least 15 metres (50 feet).

!WARNING!

Faulty cutting equipment or an incorrectly sharpened blade increases the risk of accidents.

Start

Fuel safety

•Always use a fuel container with an anti-spill valve.

•Never fill the machine while the engine is running. Always stop the engine and let it cool for a few minutes before refuelling.

•Provide good ventilation when filling or mixing fuel (petrol and 2-stroke oil).

•Move the machine at least 3 m from the filling position before starting.

•Never start the machine:

a)If you have spilt fuel on it. Wipe up all spillage.

b)If you have spilt fuel on yourself or your clothes. Change your clothes.

c)If there is a fuel leak. Make regular checks for leakage from the fuel cap and the fuel supply pipes.

Min. 3 m

(10 ft)

!WARNING!

When the engine starts with the choke lever in the choke or starter throttle position the cutting equipment starts to rotate immediately.

•The complete clutch cover with shaft must be fitted

before the machine is started, otherwise the clutch can become loose and cause personal injury.

• Never start the machine indoors. Bear in mind the dangers of inhaling the engine‘s exhaust fumes.

• Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

•Place the machine on the ground, ensure the cutting equipment runs free of twigs and stones. Push the machine body towards the ground using your left hand. (NOTE! Not with your foot). Grip the starter handle with your right hand and pull the starter cord.

Transport and storage

•Store and transport the machine and fuel so that any leakage or fumes do not risk coming into contact with sparks or naked flames. For example, electric machines, electric motors, electrical switches/power switches, heaters or the like.

•When storing and transporting fuel approved containers intended for this purpose must be used.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out how to dispose of excess fuel.

•Always keep the transport guard attached when transporting and storing the machine.

!WARNING!

Exercise great care when handling fuel. Bear in mind the risk of fire, explosions and inhaling fumes.

English – 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 240R 245R/RX 250R 252RX 265RX Symbols Symbol ExplanationContents Throttle trigger lock Safety InstructionsMachine‘s safety equipment Personal protective equipmentQuick-release Stop switchCutting attachment guard Anti-vibration systemLocking nut MufflerCutting equipment Throttle trigger lock Vibration damping system Cutting equipment Trimmer head Cutting equipmentSharpening the clearing blade Sharpening the grass blade10 ft General safety instructionsStart Fuel safety Transport and storageGeneral working instructions Basic safety precautionsDesignations Adjusting the harness and clearing sawBasic clearing techniques Working methods Forestry clearing using a saw bladeClearing‘s ABC Brush cutting using a grass blade Brush cutting using the saw bladeSweeping Grass clearing using the trimmer head and plastic knifesClearing TrimmingWhat is what on the trimmer/brushcutter? 240R, 245R What is WHAT?What is what on the trimmer/brushcutter? 245RX What is what on the clearing saw? 250R What is what on the clearing saw? 252RX What is what on the clearing saw? 265RX Assembling the handlebars 245RX, 252RX AssemblyAssembling the handlebars 240R, 245R, 250R Assembling the handlebars 265RX Adjusting the throttle controlGrass blade Assembling other guards and cutting equipment Fuelling Fuel HandlingFuel mixture Start and stop Start and StopControl before starting Start Stop240R, 245R, 250R 245RX, 252RX, 265RXCarburetor MaintenanceHigh speed needle Final setting of the idling speed TCorrectly adjusted carburetor 240R, 245R/RX 250R, 252RX 265RX MufflerCooling system 240R, 245R/RX240R, 245R/RX 250R, 252RX 265RX Oiling the air filter Air filterSpark plug Angle gearFiling the grass blade Monthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data 240R 245R 245RX Technical DataTecnical Data Technical data 250R 252RX 265RXCentre hole in saw blades/knives, ∅ Your Warranty Rights Obligations Emission Control Warranty StatementSuper Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro 2,4 mm 080-.095 12 cm ~ 3,5 m ~ 15 cm Trimmy SII Trimmy SII Page Page ´+Ho¶5+¨ Page 2001W34 114 00

245 RX, 245R/RX specifications

The Husqvarna 245R/RX and 245 RX are robust and versatile handheld brushcutters, designed to cater to both professional landscapers and dedicated homeowners. Renowned for their efficiency and reliability, these models incorporate advanced engineering and innovative features that enhance performance and usability.

One of the standout features of the Husqvarna 245R/RX is its lightweight design, weighing approximately 11.5 kg. This makes it easy to handle and reduces operator fatigue during extended use. The ergonomic handle contributes to a comfortable grip and allows for precise maneuverability, making it suitable for tackling various landscaping tasks with ease. The adjustable harness further increases comfort and helps distribute the weight evenly across the body.

Equipped with a powerful 2-cycle engine, the 245R and 245 RX deliver impressive cutting power, ensuring that even the most challenging vegetation can be managed effectively. The engine technology includes advanced air injection, which effectively removes larger debris before it reaches the air filter. This ensures that the air filter stays cleaner for longer, reducing maintenance and extending the lifespan of the machine.

Another essential feature of these brushcutters is the Auto Return Stop Switch, enabling easy operation. It automatically resets to the ON position after each use, which simplifies starting for the next session. Additionally, the model comes with a well-balanced design, which further enhances control and precision while maneuvering around obstacles.

Both the 245R and 245 RX are equipped with a tap-and-go trimmer head, making it easy to release more line when needed without stopping the machine. This feature is particularly useful for maintaining a clean and tidy garden without interruptions. Furthermore, the cutting width is adjustable, allowing users to switch quickly between trimming and cutting thicker grass and brush.

The Husqvarna 245 RX version features additional enhancements tailored for more demanding applications. Its robust gearbox provides exceptional durability, while the increased fuel tank size ensures longer runtime, making it ideal for professionals who require sustained performance in extensive commercial environments.

In summary, the Husqvarna 245R/RX and 245 RX brushcutters combine lightweight design, advanced engine technology, and user-friendly features to deliver exceptional performance for both personal and professional landscaping tasks. Their reliability, ease of use, and versatility make them a top choice for anyone looking to maintain their outdoor spaces effectively.
Top Page Image Contents