Husqvarna 245 RX, 245R/RX manual Angle gear, Filing the grass blade, Spark plug

Page 33

MAINTENANCE

Angle gear

The angle gear is filled with a sufficient quantity of grease at the factory. However, before using the machine you should check that the angle gear is filled to 3/4 with grease. Use HUSQVARNA special grease.

Normally, the grease does not need to be changed except when the angle gear is repaired.

Filing the grass blade

!WARNING!

Always stop the engine before starting work on any part of the cutting equipment. This continues to rotate even after the throttle has been released. Ensure that the cutting equipment has stopped completely and remove the cable from the spark plug before you start to work on it.

•See the cutting equipment’s

packaging for correct filing instructions.

Spark plug

The condition of the spark plug is affected by:

•An incorrect carburettor setting.

•An incorrect fuel mixture (too much or faulty oil).

•A dirty air filter.

These factors cause deposits on the spark plug electrode that may result in malfunction or starting difficulties.

0,5 mm

•The blades are sharpened using a single cut flat file.

•Sharpen all edges equally to maintain the balance of the blade.

!WARNING!

Always discard a blade that is bent, twisted, cracked, shattered or damaged in any other way. Never attempt to straighten a twisted blade for use again. Only use original blades of the prescribed type.

If the machine is low on power, difficult to start or runs poorly while idling always check the spark plug first.

If the spark plug is dirty, clean it and at the same time check that the electrode gap is 0.5 mm. The spark plug should be changed after about one month of operation or earlier if necessary.

NOTE! Always use the recommended type of spark plug. An incorrect spark plug can damage the cylinder/piston.

English – 33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents 240R 245R/RX 250R 252RX 265RX Symbols Symbol ExplanationContents Machine‘s safety equipment Safety InstructionsPersonal protective equipment Throttle trigger lockCutting attachment guard Stop switchAnti-vibration system Quick-releaseMuffler Cutting equipmentLocking nut Throttle trigger lock Vibration damping system Cutting equipment Sharpening the clearing blade Cutting equipmentSharpening the grass blade Trimmer headStart Fuel safety General safety instructionsTransport and storage 10 ftGeneral working instructions Basic safety precautionsAdjusting the harness and clearing saw Basic clearing techniquesDesignations Forestry clearing using a saw blade Clearing‘s ABCWorking methods Brush cutting using a grass blade Brush cutting using the saw bladeClearing Grass clearing using the trimmer head and plastic knifesTrimming SweepingWhat is what on the trimmer/brushcutter? 240R, 245R What is WHAT?What is what on the trimmer/brushcutter? 245RX What is what on the clearing saw? 250R What is what on the clearing saw? 252RX What is what on the clearing saw? 265RX Assembly Assembling the handlebars 240R, 245R, 250RAssembling the handlebars 245RX, 252RX Assembling the handlebars 265RX Adjusting the throttle controlGrass blade Assembling other guards and cutting equipment Fuel Handling Fuel mixtureFuelling Start and Stop Control before startingStart and stop 240R, 245R, 250R Stop245RX, 252RX, 265RX StartCarburetor MaintenanceFinal setting of the idling speed T Correctly adjusted carburetorHigh speed needle Cooling system Muffler240R, 245R/RX 240R, 245R/RX 250R, 252RX 265RX240R, 245R/RX 250R, 252RX 265RX Oiling the air filter Air filterAngle gear Filing the grass bladeSpark plug Daily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data 240R 245R 245RX Technical DataTecnical Data Technical data 250R 252RX 265RXCentre hole in saw blades/knives, ∅ Your Warranty Rights Obligations Emission Control Warranty StatementSuper Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro 2,4 mm 080-.095 12 cm ~ 3,5 m ~ 15 cm Trimmy SII Trimmy SII Page Page ´+Ho¶5+¨ Page 2001W34 114 00

245 RX, 245R/RX specifications

The Husqvarna 245R/RX and 245 RX are robust and versatile handheld brushcutters, designed to cater to both professional landscapers and dedicated homeowners. Renowned for their efficiency and reliability, these models incorporate advanced engineering and innovative features that enhance performance and usability.

One of the standout features of the Husqvarna 245R/RX is its lightweight design, weighing approximately 11.5 kg. This makes it easy to handle and reduces operator fatigue during extended use. The ergonomic handle contributes to a comfortable grip and allows for precise maneuverability, making it suitable for tackling various landscaping tasks with ease. The adjustable harness further increases comfort and helps distribute the weight evenly across the body.

Equipped with a powerful 2-cycle engine, the 245R and 245 RX deliver impressive cutting power, ensuring that even the most challenging vegetation can be managed effectively. The engine technology includes advanced air injection, which effectively removes larger debris before it reaches the air filter. This ensures that the air filter stays cleaner for longer, reducing maintenance and extending the lifespan of the machine.

Another essential feature of these brushcutters is the Auto Return Stop Switch, enabling easy operation. It automatically resets to the ON position after each use, which simplifies starting for the next session. Additionally, the model comes with a well-balanced design, which further enhances control and precision while maneuvering around obstacles.

Both the 245R and 245 RX are equipped with a tap-and-go trimmer head, making it easy to release more line when needed without stopping the machine. This feature is particularly useful for maintaining a clean and tidy garden without interruptions. Furthermore, the cutting width is adjustable, allowing users to switch quickly between trimming and cutting thicker grass and brush.

The Husqvarna 245 RX version features additional enhancements tailored for more demanding applications. Its robust gearbox provides exceptional durability, while the increased fuel tank size ensures longer runtime, making it ideal for professionals who require sustained performance in extensive commercial environments.

In summary, the Husqvarna 245R/RX and 245 RX brushcutters combine lightweight design, advanced engine technology, and user-friendly features to deliver exceptional performance for both personal and professional landscaping tasks. Their reliability, ease of use, and versatility make them a top choice for anyone looking to maintain their outdoor spaces effectively.
Top Page Image Contents