Ryobi SS30 RY30140 manual Operation, Removing the Straight Shaft Grass Deflector and String Head

Page 14

ASSEMBLY

REMOVING THE STRAIGHT SHAFT GRASS DEFLECTOR AND STRING HEAD

See Figures 10 - 13.

Align the slot in the flanged washer with the slot in the gear head.

Place the gear head locking tool through the slot in the flanged washer and gear head.

Remove the string head assembly.

Remove the flanged washer and retain it for the blade installation.

Remove the screw securing the grass deflector.

Remove the grass deflector.

NOTE: Store the string head parts together for later use.

INSTALLING THE TRI-ARC®BLADE AND BRUSHCUTTER GUARD

See Figures 10 - 14.

Install the brushcutter guard. Refer to “Attaching the Brushcutter Guard” earlier in this manual.

Place the flanged washer over the gear head shaft with the hollow side toward the brushcutter guard.

Center the blade on the flanged washer, making sure the blade fits flat and the raised hub of the flanged washer goes through the hole in the blade.

Install the cupped washer with the raised center away from the blade.

Place the blade nut onto the gear head shaft.

Place the gear head locking tool through the slot in the flanged washer and gear head.

Install the blade nut by turning it counterclockwise (left handed threads).

Tighten the blade nut securely and torque to 120 in.lbs. minimum.

GEAR HEAD

FLANGED WASHER

STRING HEAD

ASSEMBLY SLOT

LOOSENTIGHTEN

Fig. 13

GEAR HEAD

FLANGED

WASHER

SLOT

 

 

 

CUPPED

 

BRUSHCUTTER

WASHER

 

 

 

GUARD

BLADE NUT

 

 

Fig. 14

 

 

OPERATION

WARNING:

Do not allow familiarity with tools to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not recom- mended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules for BRUSH- Cutter and Blade USE Specific Safety RulesSpecific Safety Rules for Trimmer USE Symbols Symbol Name ExplanationService Features Trigger Lock Primer Starter GripRope FrontAssembly Attaching the Storage Hanger Installing the Power Head to the AttachmentRemoving the Attachment from the Power Head See FigureFront Handle Bolt Wing NUT Clamp Attaching the Front Handle CS30 and SS30Attaching the J Handle BC30 Flat WasherTo Attach the Straight Shaft Grass Deflector SS30 Attaching the Grass DeflectorTo Attach the Curved Shaft Grass Deflector CS30 Attaching the Brushcutter Guard BC30Removing the TRI-ARCBLADE and Brushcutter Guard Attaching the Shoulder Harness BC30Converting from Brushcutter to String Trimmer BC30 Converting from String Trimmer to Brushcutter BC30Removing the Straight Shaft Grass Deflector and String Head Installing the TRI-ARCBLADE and Brushcutter GuardOperation Fueling and Refueling the Trimmer Operating the TrimmerCutting Tips To Advance the Cutting LineTo Advance the Cutting Line Manually Grass Deflector Line Trimming CUT-OFF BladeTRI-ARCBLADE Operating the BrushcutterBlade Thrust Cutting Technique BladeTo Start a Cold Engine Starting and StoppingSee Figures 21 To Stop the EngineSpool Replacement MaintenanceGeneral Maintenance See Figures 24Arrows on Spool Anchor Hole String ReplacementSee Figures 26 First String SlotSpark Plug Replacement Cleaning the Exhaust Port and Muffler Spark ArrestorReplacing and Cleaning AIR Filter Fuel CAPIdle Speed Screw TroubleshootingSpeed. See Figure Warranty This Product WAS Manufactured with a Catalyst MufflerLimited Warranty Statement Maintenance Requirements MANUFACTURER’S Warranty CoverageOWNER’S Warranty Responsibilities CoverageService

SS30 RY30140, CS30 RY30120, BC30 RY30160 specifications

The Ryobi SS30 RY30140, CS30 RY30120, and BC30 RY30160 are key members of Ryobi's extensive lineup of outdoor power equipment, designed for versatility and ease of use. These machines are built to tackle various landscaping tasks, making them ideal for both homeowners and professional landscapers.

The SS30 RY30140 is a robust string trimmer that stands out due to its lightweight design and ergonomic handle, allowing for extended use without causing fatigue. It features a powerful 30cc two-stroke engine that delivers reliable performance, ensuring that grass and weeds can be tackled efficiently. With its adjustable cutting head, users can easily switch between different cutting techniques, making it suitable for edging, trimming, and clearing overgrown areas. The dual-line feed ensures a consistent cutting length, providing precise results with every pass.

The CS30 RY30120 chainsaw is designed for those who require a reliable, powerful tool for cutting and pruning tasks. It boasts a 30cc engine that makes it easy to handle, while still providing adequate power for cutting through branches and logs. The chainsaw features a tool-less chain adjustment system, allowing users to quickly and easily adjust the tension of the chain without requiring any additional tools. This convenience enhances user experience and ensures safety by allowing for timely adjustments while working. The anti-vibration technology integrated into the design reduces operator fatigue, making it more comfortable for prolonged use.

The BC30 RY30160 is a versatile brush cutter that combines power and precision for tackling tougher vegetation. It is equipped with a strong 30cc engine and features a pivoting head, enabling users to easily shift between trimming and clearing modes. This versatile functionality allows for efficient navigation through dense brush, making it perfect for clearing trails or managing overgrown areas. The BC30 also features a double strap harness that distributes weight evenly, providing additional comfort and reducing fatigue during extended work sessions.

All three models incorporate Ryobi’s innovative Easy Start technology, allowing for quick and effortless starts with minimal resistance. Ryobi’s commitment to user-friendly design ensures that even first-time users can operate these tools effectively. Additionally, these models are backed by a robust warranty and reputable customer service, further reinforcing Ryobi's dedication to quality and customer satisfaction.

In summary, the Ryobi SS30 RY30140, CS30 RY30120, and BC30 RY30160 offer a perfect blend of power, comfort, and versatility, making them essential tools for any outdoor maintenance task. Their thoughtful engineering and features cater to various user needs, ensuring that lawn care is efficient and enjoyable.
Top Page Image Contents