Ryobi CS30 RY30120 manual To Advance the Cutting Line Manually, Cutting Tips, See Figures 16

Page 16

OPERATION

WARNING:

Always hold the string trimmer away from the body keep- ing clearance between the body and the product. Any contact with the housing or string trimmer cutting head can result in burns and/or other serious personal injury.

TO ADVANCE THE CUTTING LINE

String advance is controlled by tapping the string head on grass while running engine at full throttle.

Run engine at full throttle.

Tap the spool retainer on ground to advance string. The string advances each time the spool retainer is tapped. Do not hold the spool retainer on the ground.

NOTE: The line trimming cut-off blade on the grass deflector will cut the line to the correct length.

NOTE: If the string is worn too short you may not be able to advance the string by tapping it on the ground. If so, stop the engine, and manually advance the string.

TO ADVANCE THE CUTTING LINE MANUALLY

Push the spool retainer down while pulling on string(s) to manually advance the string.

CUTTING TIPS

See Figures 16 -17.

Avoid hot surfaces by always keeping the tool away from your body. (Proper operating position shown in figure 15.)

Keep the trimmer tilted toward the area being cut; this is the best cutting area.

The curved shaft trimmer cuts when passing the unit from right to left. The straight shaft trimmer cuts when passing the unit from left to right. This will avoid throwing debris at the operator. Avoid cutting in the dangerous area shown in illustration.

Use the tip of string to do the cutting; do not force string head into uncut grass.

Wire and picket fences cause extra string wear, even breakage. Stone and brick walls, curbs, and wood may wear string rapidly.

Avoid trees and shrubs. Tree bark, wood moldings, siding, and fence posts can easily be damaged by the string.

GRASS DEFLECTOR LINE TRIMMING CUT-OFF BLADE

See Figure 18.

The trimmer is equipped with a line trimming cut-off blade on the grass deflector. For best cutting, advance string until it is trimmed to length by the cut-off blade. Advance the string whenever you hear the engine running faster than normal, or when trimming efficiency diminishes. This will maintain best performance and keep the string long enough to advance properly.

CURVED SHAFT TRIMMER

DANGEROUS

CUTTING AREADIRECTION OF ROTATION

BEST CUTTING

 

AREA

Fig. 16

 

 

 

STRAIGHT SHAFT TRIMMER

 

DANGEROUS

CUTTING AREA

DIRECTION OF

BEST CUTTING

AREA

ROTATION

Fig. 17

 

STRAIGHT SHAFT

TRIMMER LINE TRIMMING

CUT-OFF BLADE

CURVED SHAFT TRIMMER

LINE TRIMMING CUT-OFF

BLADE

Fig. 18

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules for Trimmer USE Specific Safety RulesSpecific Safety Rules for BRUSH- Cutter and Blade USE Symbols Symbol Name ExplanationService Features Starter Grip RopeTrigger Lock Primer FrontAssembly Installing the Power Head to the Attachment Removing the Attachment from the Power HeadAttaching the Storage Hanger See FigureAttaching the Front Handle CS30 and SS30 Attaching the J Handle BC30Front Handle Bolt Wing NUT Clamp Flat WasherAttaching the Grass Deflector To Attach the Curved Shaft Grass Deflector CS30To Attach the Straight Shaft Grass Deflector SS30 Attaching the Brushcutter Guard BC30Attaching the Shoulder Harness BC30 Converting from Brushcutter to String Trimmer BC30Removing the TRI-ARCBLADE and Brushcutter Guard Converting from String Trimmer to Brushcutter BC30Operation Installing the TRI-ARCBLADE and Brushcutter GuardRemoving the Straight Shaft Grass Deflector and String Head Fueling and Refueling the Trimmer Operating the TrimmerTo Advance the Cutting Line To Advance the Cutting Line ManuallyCutting Tips Grass Deflector Line Trimming CUT-OFF BladeOperating the Brushcutter Blade ThrustTRI-ARCBLADE Cutting Technique BladeStarting and Stopping See Figures 21To Start a Cold Engine To Stop the EngineMaintenance General MaintenanceSpool Replacement See Figures 24String Replacement See Figures 26Arrows on Spool Anchor Hole First String SlotCleaning the Exhaust Port and Muffler Spark Arrestor Replacing and Cleaning AIR FilterSpark Plug Replacement Fuel CAPSpeed. See Figure TroubleshootingIdle Speed Screw Warranty This Product WAS Manufactured with a Catalyst MufflerLimited Warranty Statement MANUFACTURER’S Warranty Coverage OWNER’S Warranty ResponsibilitiesMaintenance Requirements CoverageService

SS30 RY30140, CS30 RY30120, BC30 RY30160 specifications

The Ryobi SS30 RY30140, CS30 RY30120, and BC30 RY30160 are key members of Ryobi's extensive lineup of outdoor power equipment, designed for versatility and ease of use. These machines are built to tackle various landscaping tasks, making them ideal for both homeowners and professional landscapers.

The SS30 RY30140 is a robust string trimmer that stands out due to its lightweight design and ergonomic handle, allowing for extended use without causing fatigue. It features a powerful 30cc two-stroke engine that delivers reliable performance, ensuring that grass and weeds can be tackled efficiently. With its adjustable cutting head, users can easily switch between different cutting techniques, making it suitable for edging, trimming, and clearing overgrown areas. The dual-line feed ensures a consistent cutting length, providing precise results with every pass.

The CS30 RY30120 chainsaw is designed for those who require a reliable, powerful tool for cutting and pruning tasks. It boasts a 30cc engine that makes it easy to handle, while still providing adequate power for cutting through branches and logs. The chainsaw features a tool-less chain adjustment system, allowing users to quickly and easily adjust the tension of the chain without requiring any additional tools. This convenience enhances user experience and ensures safety by allowing for timely adjustments while working. The anti-vibration technology integrated into the design reduces operator fatigue, making it more comfortable for prolonged use.

The BC30 RY30160 is a versatile brush cutter that combines power and precision for tackling tougher vegetation. It is equipped with a strong 30cc engine and features a pivoting head, enabling users to easily shift between trimming and clearing modes. This versatile functionality allows for efficient navigation through dense brush, making it perfect for clearing trails or managing overgrown areas. The BC30 also features a double strap harness that distributes weight evenly, providing additional comfort and reducing fatigue during extended work sessions.

All three models incorporate Ryobi’s innovative Easy Start technology, allowing for quick and effortless starts with minimal resistance. Ryobi’s commitment to user-friendly design ensures that even first-time users can operate these tools effectively. Additionally, these models are backed by a robust warranty and reputable customer service, further reinforcing Ryobi's dedication to quality and customer satisfaction.

In summary, the Ryobi SS30 RY30140, CS30 RY30120, and BC30 RY30160 offer a perfect blend of power, comfort, and versatility, making them essential tools for any outdoor maintenance task. Their thoughtful engineering and features cater to various user needs, ensuring that lawn care is efficient and enjoyable.
Top Page Image Contents