Ryobi TR31-1 specifications Direction of Feed and Thrust, Extension Cords, Trimmer Feed Direction

Page 11

OPERATION

DIRECTION OF FEED AND THRUST

See Figures 8 and 9.

The trimmer motor and cutter revolve in a clockwise direc-

 

 

tion. This gives the tool a slight tendency to twist (in your

 

 

hands) in a counterclockwise direction, especially when the

 

 

motor starts.

ENDTRIM

FIRSTGRAINS

Because of the extremely high speed of cutter rotation during

 

 

a “proper feeding” operation, there is very little kickback to

 

 

contend with under normal conditions. However, should the

 

 

cutter strike a knot, hard grain, foreign object, etc. that would

 

 

affect the normal progress of the cutting action, there will be

 

 

a slight kickback — sufficient to spoil the trueness of your cut

 

 

if you are not prepared. Such a kickback is always in the

 

 

direction opposite to the direction of cutter rotation.

 

 

To guard against such a kickback, plan your setup and

 

 

direction of feed so that you will always be thrusting the tool

 

 

—to hold it against whatever you are using to guide the cut

—in the same direction that the leading edge of the cutter is moving. In short, the thrust should be in a direction that keeps the sharp edges of the cutter continuously biting straight into

new (uncut) wood.

EXTENSION CORDS

The use of any extension cord will cause some loss of power. To keep the loss to a minimum and to prevent tool overheating, use an extension cord that is heavy enough to carry the current the tool will draw.

A wire gage size (A.W.G.) of at least 16 is recommended for an extension cord 100 feet or less in length. When working outdoors, use an extension cord that is suitable for outdoor use. The cord's jacket will be markedWA.

CAUTION:

Keep extension cords away from any trimming area and position the cord so that it will not get caught on lumber, tools, etc., during trimming operation.

WARNING:

Check extension cords before each use. If damaged replace immediately. Never use tool with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury.

TRIMMER FEED

DIRECTION

ROTATION

TRIMMERFEED DIRECTION

BIT

 

 

BIT

TRIMMER FEED

ROTATION

 

DIRECTION

Fig. 8

GUIDE OUTSIDE

 

THRUST

ROTATION FEED

GUIDE GUIDE INSIDE

ROTATION

GUIDE

FEED

THRUST

Fig. 9

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Save this Manual for Future Reference OPERATOR’S Manual Laminate Trimmer Model TR31-1Introduction Table of ContentsStall a polarized outlet. Do not change the plug in any General Safety RulesKeep the tool and its handle dry, clean, and free from Specific Safety RulesSymbol Meaning SymbolsSymbol Name Explanation Unpacking FeaturesWrench Collet NUT Subbase CUT Scale AdjustmentsON-OFF Switch OFF Brush CAP Depth BaseUnplug Your Trimmer INSTALLING/REMOVING CuttersTo SET Depth of CUT Operation 2ND 1ST TOO Slow FeedingDepth of CUT TOO Slow TOO Fast Depth Width CUTGuide Outside Thrust Rotation Feed Direction of Feed and ThrustExtension Cords Trimmer Feed DirectionMaintenance Description AccessoriesThink Safety by Thinking Ahead Edge Shaping with Optional Trimmer GuideWorkpiece Trimming with Subbase AccessoryRouting Grooves Parallel to AN Edge Operators Manual Laminate Trimmer TR31-1

TR31-1 specifications

The Ryobi TR31-1 is a versatile triangular sander designed for both professionals and DIY enthusiasts. Renowned for its compact design and powerful performance, this sander is an essential tool for achieving smooth finishes on various surfaces.

One of the standout features of the Ryobi TR31-1 is its triangular sanding head. This design enables users to easily access tight corners and intricate details, making it ideal for furniture restoration, woodworking, and home improvement projects. The 3-speed settings allow users to customize their sanding experience, providing flexibility for different applications. Whether working on rough surfaces or achieving a fine finish, the adjustable speeds cater to multiple sanding needs.

Equipped with a robust motor, the Ryobi TR31-1 delivers consistent performance, ensuring efficient material removal. The sander operates effectively on a variety of materials, including wood, plastic, and even metal surfaces. This versatility makes it suitable for a wide range of tasks, from smoothing surfaces to removing paint.

Another important characteristic of the TR31-1 is its ergonomic design. The sander features a lightweight structure and an easily maneuverable handle, reducing user fatigue during extended use. Its anti-vibration technology further enhances comfort, allowing users to work steadily and accurately without straining their hands.

The dust collection system is also a notable aspect of the Ryobi TR31-1. It incorporates a built-in dust bag that efficiently collects debris during operation, keeping workspaces cleaner and safer. For users looking to optimize their dust management, the sander is compatible with standard vacuum hoses, offering seamless integration with existing dust extraction systems.

Durability is another key characteristic of the Ryobi TR31-1. Constructed from quality materials, it is built to withstand regular use, making it a reliable choice for long-term projects. The sander is also equipped with easy-to-replace sanding pads, ensuring that users can quickly switch between grits for varying sanding tasks.

In summary, the Ryobi TR31-1 triangular sander combines power, versatility, and comfort. With its unique triangular shape, adjustable speed settings, effective dust collection, and durable build, it stands out as a must-have tool for achieving high-quality finishes in any woodworking or renovation project. Whether you're a hobbyist or a professional, the TR31-1 is designed to meet your sanding needs effectively.
Top Page Image Contents