Ryobi TR31-1 Specific Safety Rules, Keep the tool and its handle dry, clean, and free from

Page 4

GENERAL SAFETY RULES

■ Keep the tool and its handle dry, clean, and free from

ng. Never use brake fluids, gasoline, petroleum-based

oil and grease. Always use a clean cloth when clean

products, or any strong solvents to clean your tool.

SPECIFIC SAFETY RULES

Additional Rules for Safe Operation

■Know your power tool. Read operator's manual care- fully. Learn its applications and limitations as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.

■Always wear safety glasses with side shields. Every- day eyeglasses have only impact resistant lenses; they are NOT safety glasses.

■Protect your lungs. Wear a face or dust mask if the operation is dusty.

■Protect your hearing. Wear hearing protection during extended periods of operation.

■Hold tool by insulated gripping surfaces when per- forming an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

■Inspect tool cords periodically and if damaged, have repaired at your nearest authorized service center. Stay constantly aware of cord location.

■Check damaged parts. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center. Following this rule will reduce the risk of electric shock, fire, or serious injury.

■Do not abuse cord. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil and sharp edges. Following this rule will reduce the risk of electric shock or fire.

■Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. A wire gage size (A.W.G.) of at least 16 is recommended for an extension cord 100 feet or less in length. A cord exceed- ing 100 feet is not recommended. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.

■Drugs, Alcohol, Medication. Do not operate tool while under the influence of drugs, alcohol, or any medication. Following this rule will reduce the risk of electric shock, fire, or serious injury.

■Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also.

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

SAVE THESE INSTRUCTIONS

Page 4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents OPERATOR’S Manual Laminate Trimmer Model TR31-1 Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Stall a polarized outlet. Do not change the plug in anySpecific Safety Rules Keep the tool and its handle dry, clean, and free fromSymbol Name Explanation SymbolsSymbol Meaning Features UnpackingAdjustments ON-OFF Switch OFFBrush CAP Depth Base Wrench Collet NUT Subbase CUT ScaleTo SET Depth of CUT INSTALLING/REMOVING CuttersUnplug Your Trimmer Operation TOO Slow Feeding Depth of CUTTOO Slow TOO Fast Depth Width CUT 2ND 1STDirection of Feed and Thrust Extension CordsTrimmer Feed Direction Guide Outside Thrust Rotation FeedMaintenance Accessories Think Safety by Thinking AheadEdge Shaping with Optional Trimmer Guide DescriptionTrimming with Subbase Accessory WorkpieceRouting Grooves Parallel to AN Edge Operators Manual Laminate Trimmer TR31-1

TR31-1 specifications

The Ryobi TR31-1 is a versatile triangular sander designed for both professionals and DIY enthusiasts. Renowned for its compact design and powerful performance, this sander is an essential tool for achieving smooth finishes on various surfaces.

One of the standout features of the Ryobi TR31-1 is its triangular sanding head. This design enables users to easily access tight corners and intricate details, making it ideal for furniture restoration, woodworking, and home improvement projects. The 3-speed settings allow users to customize their sanding experience, providing flexibility for different applications. Whether working on rough surfaces or achieving a fine finish, the adjustable speeds cater to multiple sanding needs.

Equipped with a robust motor, the Ryobi TR31-1 delivers consistent performance, ensuring efficient material removal. The sander operates effectively on a variety of materials, including wood, plastic, and even metal surfaces. This versatility makes it suitable for a wide range of tasks, from smoothing surfaces to removing paint.

Another important characteristic of the TR31-1 is its ergonomic design. The sander features a lightweight structure and an easily maneuverable handle, reducing user fatigue during extended use. Its anti-vibration technology further enhances comfort, allowing users to work steadily and accurately without straining their hands.

The dust collection system is also a notable aspect of the Ryobi TR31-1. It incorporates a built-in dust bag that efficiently collects debris during operation, keeping workspaces cleaner and safer. For users looking to optimize their dust management, the sander is compatible with standard vacuum hoses, offering seamless integration with existing dust extraction systems.

Durability is another key characteristic of the Ryobi TR31-1. Constructed from quality materials, it is built to withstand regular use, making it a reliable choice for long-term projects. The sander is also equipped with easy-to-replace sanding pads, ensuring that users can quickly switch between grits for varying sanding tasks.

In summary, the Ryobi TR31-1 triangular sander combines power, versatility, and comfort. With its unique triangular shape, adjustable speed settings, effective dust collection, and durable build, it stands out as a must-have tool for achieving high-quality finishes in any woodworking or renovation project. Whether you're a hobbyist or a professional, the TR31-1 is designed to meet your sanding needs effectively.
Top Page Image Contents