Ryobi TR31-1 specifications Unpacking, Features

Page 6

UNPACKING

Your trimmer has been shipped completely assembled and ready for use. After removing it from the carton, inspect it carefully to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, con- tact your nearest Ryobi dealer to obtain replacement parts before attempting to operate trimmer. A subbase accessory with handles, operator's manual, warranty registration and two wrenches are included in the carton.

WARNING:

If any parts are missing do not operate your trimmer until the missing parts are replaced. Failure to do so could result in possible serious injury.

FEATURES

KNOW YOUR TRIMMER

See Figure 2.

Before attempting to use your trimmer, familiarize yourself with all operating features and safety requirements.

Your trimmer is a versatile woodworking tool which will give you years of trouble-free performance. It is engineered with the professional in mind, but its ease of operation allows the amateur to produce work which is beautiful and precise.

As the name implies your trimmer can be used for trimming laminates. When used with recommended accessories, such as a straight guide, trimmer guide, template guide, or com- bination panel bit, it becomes even more versatile.

WARNING:

Do not allow familiarity with your trimmer to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

ELECTRICAL CONNECTION

Your trimmer has a precision built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If your tool does not operate when plugged into an outlet, double- check the power supply.

WARNING:

The operation of any trimmer can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before starting power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend wide vision safety mask for use over eyeglasses or standard safety glasses with side shields.

HEAVY DUTY MOTOR

Your trimmer has a powerful 3.8 amp motor with sufficient power to handle many trimming jobs. It is capable of deliv- ering 3/4 horsepower for heavy duty performance. The motor also has removable brushes for ease of servicing.

SWITCH

To turn your trimmer ON, slide the switch on top of the trimmer to ON position. Return the switch to OFF position when finished.

DEPTH OF CUT SCALE

Your trimmer's cutting depth can be adjusted by using the depth of cut scale. To adjust to desired depth of cut, loosen the wing bolt and move the base until the tip of the cutter touches work surface. The depth of cut is zero at this point. Position your trimmer so that the cutter can extend below the subbase for desired depth of cut setting. Move the base further until the mark on the depth of cut scale corresponds with your desired depth of cut. Then securely tighten the wing bolt.

WARNING:

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alter- ation or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

APPLICATIONS

(Use only for the purpose listed below)

Smooth, professional trimming of laminates.

Cabinet making, trimming counter tops, and finishing work.

Trimming wood and plastics.

BALL BEARING PILOTED CUTTER

See Figures 1 and 5.

Use of ball bearing piloted trimmer cutters provide a conve- nient method of laminate trimming. Guide the ball bearing surface along the edge of workpiece. Be careful to follow instructions for correct direction of feed.

Page 6

Image 6
Contents OPERATOR’S Manual Laminate Trimmer Model TR31-1 Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Stall a polarized outlet. Do not change the plug in anySpecific Safety Rules Keep the tool and its handle dry, clean, and free fromSymbols Symbol Name ExplanationSymbol Meaning Features UnpackingBrush CAP Depth Base AdjustmentsON-OFF Switch OFF Wrench Collet NUT Subbase CUT ScaleINSTALLING/REMOVING Cutters To SET Depth of CUTUnplug Your Trimmer Operation TOO Slow TOO Fast Depth Width CUT TOO Slow FeedingDepth of CUT 2ND 1STTrimmer Feed Direction Direction of Feed and ThrustExtension Cords Guide Outside Thrust Rotation FeedMaintenance Edge Shaping with Optional Trimmer Guide AccessoriesThink Safety by Thinking Ahead DescriptionTrimming with Subbase Accessory WorkpieceRouting Grooves Parallel to AN Edge Operators Manual Laminate Trimmer TR31-1

TR31-1 specifications

The Ryobi TR31-1 is a versatile triangular sander designed for both professionals and DIY enthusiasts. Renowned for its compact design and powerful performance, this sander is an essential tool for achieving smooth finishes on various surfaces.

One of the standout features of the Ryobi TR31-1 is its triangular sanding head. This design enables users to easily access tight corners and intricate details, making it ideal for furniture restoration, woodworking, and home improvement projects. The 3-speed settings allow users to customize their sanding experience, providing flexibility for different applications. Whether working on rough surfaces or achieving a fine finish, the adjustable speeds cater to multiple sanding needs.

Equipped with a robust motor, the Ryobi TR31-1 delivers consistent performance, ensuring efficient material removal. The sander operates effectively on a variety of materials, including wood, plastic, and even metal surfaces. This versatility makes it suitable for a wide range of tasks, from smoothing surfaces to removing paint.

Another important characteristic of the TR31-1 is its ergonomic design. The sander features a lightweight structure and an easily maneuverable handle, reducing user fatigue during extended use. Its anti-vibration technology further enhances comfort, allowing users to work steadily and accurately without straining their hands.

The dust collection system is also a notable aspect of the Ryobi TR31-1. It incorporates a built-in dust bag that efficiently collects debris during operation, keeping workspaces cleaner and safer. For users looking to optimize their dust management, the sander is compatible with standard vacuum hoses, offering seamless integration with existing dust extraction systems.

Durability is another key characteristic of the Ryobi TR31-1. Constructed from quality materials, it is built to withstand regular use, making it a reliable choice for long-term projects. The sander is also equipped with easy-to-replace sanding pads, ensuring that users can quickly switch between grits for varying sanding tasks.

In summary, the Ryobi TR31-1 triangular sander combines power, versatility, and comfort. With its unique triangular shape, adjustable speed settings, effective dust collection, and durable build, it stands out as a must-have tool for achieving high-quality finishes in any woodworking or renovation project. Whether you're a hobbyist or a professional, the TR31-1 is designed to meet your sanding needs effectively.