Before Operating, Safety Warnings for GAS Trimmers

RULES FOR SAFE OPERATION

• IMPORTANT SAFETY INFORMATION •

READ ALL INSTRUCTIONS

BEFORE OPERATING

•Read the instructions carefully. Be familiar with the controls and proper use of the unit.

•Do not operate this unit when tired, ill, or under the influence of alcohol, drugs, or medication.

•Children and teens under the age of 15 must not use the unit, except for teens guided by an adult.

•Inspect the unit before use. Replace damaged parts. Check for fuel leaks. Make sure all fasteners are in place and secure. Replace cutting attachment parts that are cracked, chipped, or damaged in any way. Make sure the cutting attachment is properly installed and securely fastened. Be sure the cutting attachment shield is properly attached, and positioned as recom- mended. Failure to so can result in personal injury to the operator and bystanders, as well as damage to the unit.

•Use only 0.080 inch (2.03 mm) diameter genuine Ryobi replacement line. Never use metal-reinforced line, wire, or rope, etc.. These can break off and become a dangerous projectile.

•Be aware of the risk of injury to the head, hands and feet.

•Clear the area to be cut before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the cutting attachment. Clear the area of children, bystanders, and pets. At a minimum, keep all children, bystanders and pets outside a 50 feet (15 m) radius; there still may be a risk to bystanders from thrown objects. Bystanders should be encouraged to wear eye protection. If you are approached, stop the engine and cutting attachment immediately.

•Squeeze the throttle control and check that it returns automatically to the idle position. Make all adjustments or repairs before using unit.

•This unit was not designed to be used as a brushcut- ter. Do not attach or operate this unit with any type of brushcutting blade or brushcutting attachment.

SAFETY WARNINGS FOR GAS TRIMMERS

WARNING: Gasoline is highly flammable, and its vapors can explode if ignited. Take the following precautions:

•Store fuel only in containers specifically designed and approved for the storage of such materials.

•Always stop the engine and allow it to cool before filling the fuel tank. Never remove the cap of the fuel tank, or add fuel, when the engine is hot. Never operate the unit without the fuel cap securely in place. Loosen the fuel tank cap slowly to relieve any pressure in the tank.

•Mix and add fuel in a clean, well-ventilated area outdoors where there are no sparks or flames. Slowly remove the fuel cap only after stopping engine. Do not smoke while fueling or mixing fuel. Wipe up any spilled fuel from the unit immediately.

•Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapors dissipate.

•Move the unit at least 30 feet (9.1 m) from the fueling source and site before starting the engine. Do not smoke, keep sparks and open flames from the area while adding fuel or operating the unit.

WHILE OPERATING

•Never start or run the unit inside a closed room or building. Breathing exhaust fumes can kill. Operate this unit only in a well ventilated area outdoors.

•Wear safety glasses or goggles that are marked as meeting ANSI Z87.1 standards, and ear/hearing pro- tection when operating this unit. Wear a face or dust mask if the operation is dusty.

•Wear heavy, long pants, boots, gloves and a long sleeve shirt. Do not wear loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair above shoulder level.

•The cutting attachment shield must always be in place while operating the unit. Do not operate unit without both trimming lines extended, and the proper line installed. Do not extend the trimming line beyond the length of the shield.

•This unit has a clutch. The cutting attachment remains stationary when the engine is idling. If it does not, have the unit adjusted by an authorized service technician.

•Adjust the J-handle to your size to provide the best grip.

•Be sure the cutting attachment is not in contact with anything before starting the unit.

•Use the unit only in daylight or good artificial light.

•Avoid accidental starting. Be in the starting position whenever pulling the starter rope. The operator and unit must be in a stable position while starting. See Starting/Stopping Instructions.

•Use the right tool. Only use this tool for the purpose intended.

•Do not overreach. Always keep proper footing and balance.

•Always hold the unit with both hands when operating. Keep a firm grip on both the front and rear handle or grips.

•Keep hands, face, and feet at a distance from all moving parts. Do not touch or try to stop the cutting attachment when it is rotating.

767rj specifications

The Ryobi 767RJ is a versatile and highly efficient piece of outdoor equipment designed to meet the needs of both homeowners and professional landscapers. This powerful multi-tool boasts an array of features and advanced technologies that make it an essential addition to any gardening or yard maintenance arsenal.

One of the standout characteristics of the Ryobi 767RJ is its potent 2-stroke engine. This engine is designed for optimal performance, allowing users to tackle a wide range of tasks with ease. Whether you're trimming hedges, clearing weeds, or maintaining pathways, the reliable power of the 767RJ ensures that you can accomplish your gardening goals efficiently.

The Ryobi 767RJ includes a quick-change attachment system, making it incredibly adaptable to various jobs. The multi-tool comes with numerous attachments, such as a trimmer head, a brush cutter, and a hedge trimmer, enabling users to switch from one task to another seamlessly. This flexibility eliminates the need for multiple machines, saving both time and money.

But ease of use doesn’t stop there. The telescoping shaft of the Ryobi 767RJ allows users to adjust the length of the tool, providing greater comfort and accessibility. This feature is particularly useful when working in tight spaces or when tackling tall hedges. Additionally, the dynamic anti-vibration system minimizes user fatigue, making extended periods of operation more manageable.

Durability is another hallmark of the Ryobi 767RJ. It is constructed with robust materials that can withstand the rigors of outdoor use, ensuring a long lifespan. Furthermore, the lightweight design enhances maneuverability, allowing users to work for extended periods without the strain that heavier tools might impose.

Convenience features, such as an easy-to-reach start mechanism and on-board storage for attachments, enhance the user experience. The Ryobi 767RJ is not just about raw power; it's designed with the user’s comfort and efficiency in mind.

In summary, the Ryobi 767RJ multi-tool stands out due to its powerful 2-stroke engine, quick-change attachments, ergonomic design, and durability. It's a comprehensive solution for anyone looking to maintain their outdoor spaces with professionalism and ease. Whether you are a DIY enthusiast or a seasoned professional, the Ryobi 767RJ delivers reliable performance that can meet your landscaping needs.