Ryobi 767rj manual Maintenance and Repair Instructions, Decorative Trimming, Maintenance Schedule

Page 12

OPERATING INSTRUCTIONS

DECORATIVE TRIMMING

Decorative trimming is accomplished by removing all vegetation around trees, posts, fences, etc.

Rotate the whole unit so that the cutting attachment is at a 30° angle to the ground (Fig. 12).

Fig. 12

MAINTENANCE AND REPAIR INSTRUCTIONS

NOTE: Some maintenance procedures may require special tools or skills. If you are unsure about these procedures take your unit to an authorized service dealer.

MAINTENANCE SCHEDULE

These required maintenance procedures should be performed at the frequency stated in the table. They should also be included as part of any seasonal tune-up.

WARNING: To prevent serious personal injury, never do maintenance or repairs with unit running. Always do maintenance and repairs on a cool unit. Disconnect spark plug wire to ensure the unit will not start.

FREQUENCY

MAINTENANCE REQUIRED

REFER TO:

 

 

 

Before Starting Engine

Fill fuel tank with correct oil and fuel mixture.

Page 9

 

 

 

Every 10 Hours

Clean and re-oil air filter.

Page 15

 

 

 

Every 50 Hours

Check spark plug condition and gap.

Page 16

 

 

 

LINE INSTALLATION FOR THE SPEEDSPOOL®

Always use genuine Ryobi 0.080 in. (2.03 mm.) replacement line. Larger line may make the engine overheat or fail.

WARNING: Never use metal-reinforced line, wire, or rope, etc.. These can break off and become a dangerous projectile.

There are two methods to replace the SpeedSpool® trimming line.

•Wind the inner reel with new line

•Install a prewound inner reel

Winding the Inner Reel With New Line

NOTE: It Is unnecessary to remove the bump knob to install new trimming line.

1.Cut two pieces of 0.080 in. (2.03 mm.) trimming line, 10 feet (3 m.) long.

WARNING: Always use the correct line length when installing trimming line on the unit. The line may not release properly if the line is too long.

2.Hold the outer spool and turn the inner reel counterclockwise to line up the arrows on the outer spool and inner reel (Fig. 13).

Top View Of The

Arrows

SpeedSpool®

 

Outer Spool

 

Inner Reel

Bump Knob

Fig. 13

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OPERATOR’S Manual Table of Contents IntroductionCalifornia Emission Regulations Spark ArrestorRules for Safe Operation Arrestor KitSafety Warnings for GAS Trimmers Before OperatingWhile Operating Safety and International Symbols Other Safety WarningsSymbolmeaning Safety Alert Symbol For Service INFORMATION, CallSymbolmeaning Primer Bulb Unleaded FuelThrown Objects and Rotating Cutter can Cause Severe Injury ON/OFF Stop ControlKnow Your Unit ApplicationsCutting grass and light weeds Decorative trimming around trees, fences, etcAssembly Instructions Installing and Adjusting the J-HANDLEInstalling the Cutting Attachment Shield Using Blended Fuels Using Fuel AdditivesOIL and Fuel Information OIL and Fuel Mixing InstructionsSTARTING/STOPPING Instructions Starting InstructionsStopping Instructions Adjusting Trimming Line Length Operating InstructionsHolding the Trimmer Tips for Best Trimming ResultsMaintenance and Repair Instructions Maintenance ScheduleLine Installation for the Speedspool Decorative TrimmingInstalling a Prewound Reel Speedspool Replacement Parts Cleaning the SpeedSpoolReleasing the Inner Reel AIR Filter Maintenance Cleaning the Air FilterReinstalling the Air filter/Muffler Cover Removing the Air Filter/Muffler CoverCarburetor Adjustment Replacing the Spark PlugCleaning and Storage Troubleshooting Specifications EnginePage Owners Warranty Responsibilities Manufacturers Warranty CoverageREV. a 12/99

767rj specifications

The Ryobi 767RJ is a versatile and highly efficient piece of outdoor equipment designed to meet the needs of both homeowners and professional landscapers. This powerful multi-tool boasts an array of features and advanced technologies that make it an essential addition to any gardening or yard maintenance arsenal.

One of the standout characteristics of the Ryobi 767RJ is its potent 2-stroke engine. This engine is designed for optimal performance, allowing users to tackle a wide range of tasks with ease. Whether you're trimming hedges, clearing weeds, or maintaining pathways, the reliable power of the 767RJ ensures that you can accomplish your gardening goals efficiently.

The Ryobi 767RJ includes a quick-change attachment system, making it incredibly adaptable to various jobs. The multi-tool comes with numerous attachments, such as a trimmer head, a brush cutter, and a hedge trimmer, enabling users to switch from one task to another seamlessly. This flexibility eliminates the need for multiple machines, saving both time and money.

But ease of use doesn’t stop there. The telescoping shaft of the Ryobi 767RJ allows users to adjust the length of the tool, providing greater comfort and accessibility. This feature is particularly useful when working in tight spaces or when tackling tall hedges. Additionally, the dynamic anti-vibration system minimizes user fatigue, making extended periods of operation more manageable.

Durability is another hallmark of the Ryobi 767RJ. It is constructed with robust materials that can withstand the rigors of outdoor use, ensuring a long lifespan. Furthermore, the lightweight design enhances maneuverability, allowing users to work for extended periods without the strain that heavier tools might impose.

Convenience features, such as an easy-to-reach start mechanism and on-board storage for attachments, enhance the user experience. The Ryobi 767RJ is not just about raw power; it's designed with the user’s comfort and efficiency in mind.

In summary, the Ryobi 767RJ multi-tool stands out due to its powerful 2-stroke engine, quick-change attachments, ergonomic design, and durability. It's a comprehensive solution for anyone looking to maintain their outdoor spaces with professionalism and ease. Whether you are a DIY enthusiast or a seasoned professional, the Ryobi 767RJ delivers reliable performance that can meet your landscaping needs.
Top Page Image Contents