Ryobi 767rj manual Assembly Instructions, Installing and Adjusting the J-HANDLE

Page 8

ASSEMBLY INSTRUCTIONS

INSTALLING AND ADJUSTING THE J-HANDLE

1.Place the J-handle between the top and middle clamp pieces (Fig. 1).

J-Handle

(4) Screws

Top Clamp

Middle Clamp

Bottom Clamp

Nuts

Fig. 1

2.While holding the three pieces together, install the four (4) screws through the top clamp and into middle clamp.

NOTE: The holes in the top and middle clamp will line up only when assembled correctly.

3.Place the clamps and J-handle the over the shaft housing and onto the bottom clamp.

4.Hold each hex nut in the bottom clamp recess with a finger. Start screws with a large Phillips screwdriver. Do not tighten until you make the handle adjustment.

5.Slide the J-handle in or out until the arrow/white line on the decal touches the clamp assembly (Fig. 2).

Decal

Fig. 2

6.While holding the unit in the operating position (Fig. 3), position the J-handle to the location that provides you the best grip.

7.Tighten the clamp screws evenly, until the J-handle is secure.

INSTALLING THE CUTTING ATTACHMENT SHIELD

Use the following instructions if the cutting attachment shield on your unit is not installed.

WARNING: Never operate the trimmer without the cutting attachment shield in place to prevent serious personal injury.

1.Slide the cutting attachment shield into the shield mount on the cutting attachment. Align the screw holes in the shield with the holes in the cutting attachment (Fig. 4).

Shaft Housing

Cutting Attachment

Shield

Shield Mount

Cutting Attachment

Fig. 4

2.Place a hex lock nut into one of the three recessed holes on the top of the cutting attachment shield (Fig 5).

Cutting Attachment

Shield

Recessed Holes

Hex Lock Nut

Fig. 5

Fig. 3

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents OPERATOR’S Manual Table of Contents IntroductionCalifornia Emission Regulations Spark ArrestorRules for Safe Operation Arrestor KitWhile Operating Safety Warnings for GAS TrimmersBefore Operating Safety and International Symbols Other Safety WarningsSymbolmeaning Safety Alert Symbol For Service INFORMATION, CallSymbolmeaning Primer Bulb Unleaded FuelThrown Objects and Rotating Cutter can Cause Severe Injury ON/OFF Stop ControlKnow Your Unit ApplicationsCutting grass and light weeds Decorative trimming around trees, fences, etcInstalling the Cutting Attachment Shield Assembly InstructionsInstalling and Adjusting the J-HANDLE Using Blended Fuels Using Fuel AdditivesOIL and Fuel Information OIL and Fuel Mixing InstructionsStopping Instructions STARTING/STOPPING InstructionsStarting Instructions Adjusting Trimming Line Length Operating InstructionsHolding the Trimmer Tips for Best Trimming ResultsMaintenance and Repair Instructions Maintenance ScheduleLine Installation for the Speedspool Decorative TrimmingInstalling a Prewound Reel Releasing the Inner Reel Speedspool Replacement PartsCleaning the SpeedSpool AIR Filter Maintenance Cleaning the Air FilterReinstalling the Air filter/Muffler Cover Removing the Air Filter/Muffler CoverCarburetor Adjustment Replacing the Spark PlugCleaning and Storage Troubleshooting Specifications EnginePage Owners Warranty Responsibilities Manufacturers Warranty CoverageREV. a 12/99

767rj specifications

The Ryobi 767RJ is a versatile and highly efficient piece of outdoor equipment designed to meet the needs of both homeowners and professional landscapers. This powerful multi-tool boasts an array of features and advanced technologies that make it an essential addition to any gardening or yard maintenance arsenal.

One of the standout characteristics of the Ryobi 767RJ is its potent 2-stroke engine. This engine is designed for optimal performance, allowing users to tackle a wide range of tasks with ease. Whether you're trimming hedges, clearing weeds, or maintaining pathways, the reliable power of the 767RJ ensures that you can accomplish your gardening goals efficiently.

The Ryobi 767RJ includes a quick-change attachment system, making it incredibly adaptable to various jobs. The multi-tool comes with numerous attachments, such as a trimmer head, a brush cutter, and a hedge trimmer, enabling users to switch from one task to another seamlessly. This flexibility eliminates the need for multiple machines, saving both time and money.

But ease of use doesn’t stop there. The telescoping shaft of the Ryobi 767RJ allows users to adjust the length of the tool, providing greater comfort and accessibility. This feature is particularly useful when working in tight spaces or when tackling tall hedges. Additionally, the dynamic anti-vibration system minimizes user fatigue, making extended periods of operation more manageable.

Durability is another hallmark of the Ryobi 767RJ. It is constructed with robust materials that can withstand the rigors of outdoor use, ensuring a long lifespan. Furthermore, the lightweight design enhances maneuverability, allowing users to work for extended periods without the strain that heavier tools might impose.

Convenience features, such as an easy-to-reach start mechanism and on-board storage for attachments, enhance the user experience. The Ryobi 767RJ is not just about raw power; it's designed with the user’s comfort and efficiency in mind.

In summary, the Ryobi 767RJ multi-tool stands out due to its powerful 2-stroke engine, quick-change attachments, ergonomic design, and durability. It's a comprehensive solution for anyone looking to maintain their outdoor spaces with professionalism and ease. Whether you are a DIY enthusiast or a seasoned professional, the Ryobi 767RJ delivers reliable performance that can meet your landscaping needs.
Top Page Image Contents