Echo 225SB, 261, 231, SRM-2100SB, 2400, 260SB, PAS-2100, 225VPB, 211SB Blades, Sharpening Level

Page 18

MAINTENANCE

99944200595

 

 

4.Align the locating screw hole in gear case with the locating hole in drive shaft assembly, install and tighten locating screw (A), and tighten clamping screw (B)..

Flat edge of washers (D) must be against drive shaft.

C

Blades

Blades should only be removed and reinstalled by an Authorized ECHO Servicing Dealer, otherwise premature wear or internal damage may occur.

Sharpening

Level 2.

Parts Required: none

Hedge Trimmer blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands.

1.Move stop switch to STOP position.

2.Disconnect spark plug wire.

3.Remove blade guard, if installed (see “Blade Guard Remove/Install instructions”).

4.Slide blades to allow file clearance using slots (A) on bottom of blade. Do not pry against cutting edges.

5.File each edge carefully. Follow the original shape of the blade.

If a power grinder is used DO NOT allow blade to over heat.

6.Install blade guard, if necessary (see “Blade Guard Remove/Install instructions”).

A

6 mm (.25 in.) radius

45o

18

X7532095608

© 3/2015 ECHO Inc.

Image 18
Contents Operator’s Manual Table of Contents Introduction Servicing InformationManual Safety Symbols and Important Information SafetyAdditional or Replacement Manuals 99944200595Physical Condition International SymbolsPersonal Condition and Safety Equipment Eye ProtectionBreathing Protection Hand ProtectionHearing/Ear Protection Proper ClothingSafety Repetitive Stress Injuries RSIEquipment Safety Description Shaft LabelContents Assembly Power Head Shaft/Lower Shaft AssemblySupport Loop Handle Removal Adjusting Cutting Angle OperationRotate Cutter Assembly Hedge Trimming Skill Levels MaintenanceMaintenance Intervals LubricationDrive Shaft Assembly Gear CaseBlades Sharpening LevelAdjustment Level Storage Hook Installation StorageSpecifications ModelWarranty Statements Exceptions99922201032 11/18/2011 99944200595 Thank you for choosing Echo Power Equipment Product Registration99944200595 99944200595 ECHO, Incorporated
Related manuals
Manual 28 pages 45.17 Kb Manual 24 pages 54.36 Kb Manual 20 pages 11.4 Kb Manual 26 pages 54.61 Kb Manual 24 pages 23.91 Kb Manual 28 pages 8.83 Kb Manual 24 pages 40.59 Kb

266, 261SB, 225SB, 210, 2400SB specifications

Echo products are renowned in the outdoor power equipment industry, and their latest lineup, including the Echo 260, 261, 231, SRM-2100SB, and 2400, showcases advanced features and innovative technologies that cater to both professionals and homeowners alike.

The Echo 260 and 261 models are powerful string trimmers designed for demanding landscaping tasks. Both units are equipped with a robust 25.4cc engine that delivers impressive power, allowing users to tackle thick grass and weeds with ease. The 261 model builds on the success of the 260 by incorporating an easy-start system, reducing the effort required to start the trimmer. Additionally, these models feature a dual-line cutting system, which enhances efficiency and reduces mowing time.

The Echo 231 model is ergonomically designed for users seeking a lightweight and manageable trimmer. With its 21.2cc engine, it strikes a balance between power and portability, making it an ideal choice for homeowners with smaller yards. The trimmer’s lightweight design and comfortable grip ensure less fatigue during extended use, promoting ease of operation without sacrificing performance.

Transitioning to the SRM-2100SB, this brush cutter is built for heavy-duty tasks. It features a powerful 21.2cc engine and an impressive cutting diameter, making it suitable for tackling thick brush and tough terrain. One of its key characteristics is the Speed-Feed 400 head, which allows users to quickly and easily reload the trimmer line without disassembling the head—an innovation that saves valuable time and effort.

Lastly, the Echo 2400 chain saw is an embodiment of power and precision. It is powered by a 40.2cc engine, allowing it to tackle both residential and light commercial cutting jobs efficiently. The saw features a professional-grade, lightweight design, making it easy to maneuver while reducing operator fatigue. Its automatic oiler ensures consistent lubrication of the chain, resulting in reduced wear and extended chainsaw life.

In conclusion, the Echo 260, 261, 231, SRM-2100SB, and 2400 are impressive tools that combine power, efficiency, and user-friendly features. These models represent Echo's commitment to excellence in outdoor power equipment, providing users with reliable and effective tools for a variety of landscaping tasks. Whether for professional use or home maintenance, Echo’s latest innovations ensure quality performance and durability in every cut.