Echo 210SB, 260, 261, 231 Power Head Shaft/Lower Shaft Assembly, Plastic Shield Installation

Page 11

99944200540

ASSEMBLY

 

 

ASSEMBLY

Power Head Shaft/Lower Shaft Assembly

For more information scan this QR code.

Do not perform maintenance or assembly procedures with engine running.

Parts Required:

PAS or SRM-SB Power Head w/Shaft & Coupling

1. Set Power Head/Shaft Assembly on a level surface.

2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn

B

D

to lock-out position.

 

3. Remove vinyl cap from attachment drive shaft.

4.

Remove cardboard spacer, if necessary.

E

C

5.

Carefully fit attachment drive shaft assembly into coupler (B)

A

 

to decal assembly line (C), making sure that the inner lower

 

 

 

drive shaft engages the square upper drive shaft socket.

 

Note: Earlier model Power Heads may have shorter couplings. Short couplings fit flush to decal point (E). New couplings are 4-3/4 in. long, and fit flush to line (C).

Note: Lower bearing housing and head assembly must be in line with the engine.

6.Rotate locator pin (A) 1/4 turn clockwise to engage lower shaft hole. Insure locator pin is fully engaged by twisting lower drive shaft. Locator pin should snap flush in coupler. Full engagement will prevent further shaft rotation.

7.Secure lower shaft assembly to coupler by tightening clamping knob (D).

D

C

Plastic Shield Installation

(For Nylon Line Operation)

Parts Required:

Plastic Debris Shield, Shield Plate,

 

three (3) 5 x 16 mm screws.

 

 

 

 

 

 

 

 

 

 

 

 

The plastic shield is for use with the Nylon Line Head only. Install Metal Shield when using plastic or metal blades, or serious injury may result.

X7532279108

11

© 2/2014 ECHO Inc.

Image 11
Contents Operator’s Manual Table of Contents Servicing Information Introduction99944200540 SafetyAdditional or Replacement Manuals Manual Safety Symbols and Important InformationPersonal Condition and Safety Equipment International SymbolsVibration and Cold Hearing ProtectionProper Clothing Hot Humid WeatherKeep a Firm Grip Repetitive Stress InjuriesRead the Manuals Clear the Work AreaAvoid Hot Surfaces EquipmentShaft Label DescriptionContents Plastic Shield Installation AssemblyPower Head Shaft/Lower Shaft Assembly To Advance Trimmer Line Nylon Line Head InstallationRemove Nylon Line Head Operation Lubrication MaintenanceMaintenance Intervals Skill LevelsDrive Shaft Lower Nylon Line ReplacementGear Housing Trimmer head is now fully loaded and ready for operation Storage Storage Hook InstallationModel SpecificationsOWNER’S Responsibility Warranty StatementsWarranty Statements 99944200540 99944200540 ECHO, Incorporated
Related manuals
Manual 28 pages 45.17 Kb Manual 24 pages 54.36 Kb Manual 20 pages 11.4 Kb Manual 26 pages 54.61 Kb Manual 28 pages 4.55 Kb Manual 24 pages 23.91 Kb Manual 28 pages 8.83 Kb

266, 280, 261SB, 225SB, 210 specifications

Echo products are renowned in the outdoor power equipment industry, and their latest lineup, including the Echo 260, 261, 231, SRM-2100SB, and 2400, showcases advanced features and innovative technologies that cater to both professionals and homeowners alike.

The Echo 260 and 261 models are powerful string trimmers designed for demanding landscaping tasks. Both units are equipped with a robust 25.4cc engine that delivers impressive power, allowing users to tackle thick grass and weeds with ease. The 261 model builds on the success of the 260 by incorporating an easy-start system, reducing the effort required to start the trimmer. Additionally, these models feature a dual-line cutting system, which enhances efficiency and reduces mowing time.

The Echo 231 model is ergonomically designed for users seeking a lightweight and manageable trimmer. With its 21.2cc engine, it strikes a balance between power and portability, making it an ideal choice for homeowners with smaller yards. The trimmer’s lightweight design and comfortable grip ensure less fatigue during extended use, promoting ease of operation without sacrificing performance.

Transitioning to the SRM-2100SB, this brush cutter is built for heavy-duty tasks. It features a powerful 21.2cc engine and an impressive cutting diameter, making it suitable for tackling thick brush and tough terrain. One of its key characteristics is the Speed-Feed 400 head, which allows users to quickly and easily reload the trimmer line without disassembling the head—an innovation that saves valuable time and effort.

Lastly, the Echo 2400 chain saw is an embodiment of power and precision. It is powered by a 40.2cc engine, allowing it to tackle both residential and light commercial cutting jobs efficiently. The saw features a professional-grade, lightweight design, making it easy to maneuver while reducing operator fatigue. Its automatic oiler ensures consistent lubrication of the chain, resulting in reduced wear and extended chainsaw life.

In conclusion, the Echo 260, 261, 231, SRM-2100SB, and 2400 are impressive tools that combine power, efficiency, and user-friendly features. These models represent Echo's commitment to excellence in outdoor power equipment, providing users with reliable and effective tools for a variety of landscaping tasks. Whether for professional use or home maintenance, Echo’s latest innovations ensure quality performance and durability in every cut.