Echo 260, 261, 231, SRM-2100SB, 2400, 225 Trimmer head is now fully loaded and ready for operation

3.Insert one end of trimmer line into an eyelet, and push line equal distance through trimmer head.

4.Hold trimmer head while turning knob clockwise to wind line onto spool until about 5” (13 cm) of each line remains exposed.

Trimmer head is now fully loaded and ready for operation.

When the wear indicators located at the bottom of the Speed-Feed® head are worn smooth, or if holes appear, replacement of the cover or the entire Speed-Feed® head is required.

Wear Indicators

© 2/2014 ECHO Inc.