Drive control lever
The operation of any trimmer can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your trimmer or perform- ing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. The safety goggles provided with your trimmer may be worn over spec- tacles.
HOWTO USEYOURTRIMMER
ENGINE SPEED
The engine speed is controlled by a throttle located on the side of the upper handle. Fast position is for starting and normal trimming. Slow is for light trimming and fuel economy. Stop is for stopping the engine.
.= @
/ | • ij |
/•'¢_ ii - | '_ _ - |
TRIMMER HEAD DRIVE CONTROL
Your trimmer is equipped with a trimmer head drive control bar and lever which
requires the operator to be positioned behind the trimmer handle to operate the trimmer.
•Trimmer head rotation is controlled by holding the trimmer head control bar down to the handle and pushing the drive control lever forward until it clicks; then release the lever.
•Trimmer head rotation will stop when the control bar is released.
Trimmer head
control | bar |
To engage | Trimmer head |
trimmer head | disengaged |
|
TO ADJUST TRIMMING HEIGHT
_CAUTION: Stop the engine and wait for all moving parts to stop. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
The height of cut can be set to six (6) different positions ranging from
1.To adjust trimming height, push in the locking plate tab and move trimmer head up or down to desired position.
2.Release tab and be sure head is locked into one of the six (6) height positions.
Adjustable
Trimme_!)
Head
\
\
\
Locking
Plate Tab
/, |
| \\ |
|
| / | \ | \ |
_ | l |
| |
t |
|
|
7