Genesis Advanced Technologies 1.1 owner manual Remote Control

Page 12

~ÄëçäìíÉ=ÑáÇÉäáíó

use the supplied jumpers to connect the rear tweeters either to the midrange or the front tweeters. Depending on the amplifier used, one or the other will sound better.

These jumpers are made using the same internal wire connect the drivers of the Genesis 1.1. However, you should also try using jumpers made of the same wire as you use for your speaker cables. For example, if your speaker cables are Cardas Golden Reference, then get the same for your jumpers.

Next, the crossover box should be hooked up to the midrange/tweeter wings. From left to right, match the cross-over box connectors to the mid-panel connectors. Again, a set of jumpers is provided to help you get started. These are made of the Genesis internal hook-up wire, and are high quality OFC conductors with Kimber™ banana plugs. You could also try having jumpers made of the same wire as your speaker cables.

Using either set of jumpers, when the banana plugs are used to attach the jumpers to the binding posts, remove completely the gold nut on the binding posts if it is not used. The sound will improve with the removal of unnecessary metal. Keep the nuts safely in case you will be using spades for termination in the future.

1.6Remote Control

The Genesis remote control for the Servo- Controlled Bass amplifier has two modes of operation. To operate the G1.1 woofer amplifier, press the MODE button until the red LED lights.

The remote control is used to turn on, and set up the volume, and other parameters on the woofer towers. The display on the amplifier will always flash to identify the function being adjusted.

The high-pass “HP” filter determines how low the woofers will play. Set this initially to 16Hz. Then, adjust the low-pass “LP” filter (how high a frequency that the woofer plays). Set this to 100Hz using the buttons marked "LP". Use the button marked "VOL" to adjust the bass gain to 15, to start with.

If you are using the Servo-Bass Interconnect, use the “PHS” buttons to adjust the phase to 0 (zero). If you are using the output from the

Ver 2.0

12

 

Image 12
Contents ~ÄëçäìíÉ=ÑáÇÉäáíó Details Message from Genesis ~ÄëçäìíÉ=ÑáÇÉäáíó Set-up Guide Unpacking~ÄëçäìíÉ=ÑáÇÉäáíó ~ÄëçäìíÉ=ÑáÇÉäáíó Placement of the Genesis 1.1 Loudspeaker Woofer Connections Servo-controlled Bass Amplifier Connections Crossover Connections Remote Control Tuning the system Crossover ControlsBegin with the bass level Imaging and Soundstage Phase Control Further adjustments Running-in the System Make One Change at a TimeDefining the Soundstage Appropriate Mid-bass BalanceRoom Treatment Mastering the Refinements of the system Technology Design Philosophy Dipolar Line SourceGenesis Ribbon Tweeter 75-inch midrange ribbon Servo-bass AdvantageWoofer Tower Servo-controlled Amplifier/Crossover CrossoverCorian Baffle, Wings and Bases SummarySpecifications

1.1 specifications

Genesis Advanced Technologies 1.1 represents a significant leap forward in the realm of advanced audio technologies. This innovative product line is renowned for its uncompromising sound quality and cutting-edge design, catering to audiophiles and music enthusiasts who demand the best from their audio systems.

One of the standout features of Genesis Advanced Technologies 1.1 is its proprietary driver technology. These drivers are meticulously engineered to produce an incredibly accurate and detailed sound stage, allowing listeners to experience music as it was intended by the artists. The advanced materials used in the drivers ensure exceptional linearity and reduced distortion, even at high volume levels. This attention to detail means that every note, from the softest piano keys to the most vigorous orchestral crescendos, is rendered with clarity and fidelity.

In addition to its bespoke drivers, Genesis Advanced Technologies 1.1 incorporates advanced crossover networks. These crossover systems intelligently distribute frequencies between drivers, optimizing performance and ensuring seamless integration across the entire frequency spectrum. This results in a rich and immersive listening experience, making it easy for users to pick out subtle background details in their favorite tracks.

Another significant aspect of Genesis Advanced Technologies 1.1 is its elegant design. The enclosures are not only aesthetically pleasing but are also constructed from high-quality materials designed to minimize resonances and vibrations. The use of innovative dampening techniques enhances the overall audio performance, creating a solid foundation for sound reproduction.

The technology behind Genesis Advanced Technologies also includes sophisticated tuning processes, which calibrate each unit for optimal acoustic performance in various listening environments. Users can often customize settings to suit their room dynamics, achieving a perfectly balanced sound tailored to their individual preferences.

In terms of connectivity, Genesis Advanced Technologies 1.1 supports a variety of options, catering to both traditional and modern audio systems. This versatility ensures compatibility with a wide range of sources, including high-resolution digital formats, vinyl, and streaming services.

Overall, Genesis Advanced Technologies 1.1 embodies a commitment to excellence in audio performance. With its blend of state-of-the-art technology, meticulous craftsmanship, and user-centric design, it continues to set the standard in the high-end audio market. Whether for casual listening or critical evaluation, Genesis Advanced Technologies 1.1 delivers an unparalleled auditory experience that is sure to delight even the most discerning audiophiles.