Genesis Ribbon Tweeter | Genesis Advanced Technologies 1.1 specification

~ÄëçäìíÉ=ÑáÇÉäáíó

Another advantage of the 7.5-foot line source is that the vertical spectral content of music is virtually the same throughout the length of the line source. Hence, the seating height does not matter with this speaker; unlike point source speakers where it is important for the ears to be aligned with the tweeter.

The Genesis 1.1 is also a dipole radiator. The midrange and tweeter drivers are mounted on a rigid Corian™ baffle with no enclosure. This has two advantages: firstly, it eliminates any enclosure or boxy colorations caused by cabinet vibrations or resonance.

Secondly, the dipole creates a cardioid pattern (like a figure-eight), which has its maximum output at the listening position and behind the speaker itself, and minimum output to the sides in the plane of the loudspeakers. This very effectively eliminates the bounce from the sidewalls. Hence, in conjunction with the line source, the Genesis 1.1 has no first reflection from the floor, ceiling or sidewalls. The net result is that there are far fewer detail-robbing room reflections from the room than other types of loudspeakers. With fewer spurious reflections to confuse your hearing, the program source emerges more clearly. Imaging is deeper, yet more focused.

This results in a loudspeaker system that is virtually room- independent. Also, because there are no phase and frequency distorting reflections created, one can be transported into the audience of the actual concert hall where the music was recorded.

4.2The Genesis Ribbon Tweeter

Reviewers in the Audiophile press have often remarked that the Genesis circular ribbon tweeter is the world’s best. It is a one inch circular planar ring-ribbon design crafted from an extremely thin membrane of Kapton with a photo-etched aluminum “voice coil” that is a mere 0.0005 inch thick. The entire radiating structure has less mass than the air in front of it! That is why it will accurately reproduce frequencies beyond 36k Hz.

The result of this design is a driver that has a rapid and uniform response to high frequencies, and has the speed of the best electrostatic designs without the high distortion and poor dispersion that is typically associated with them.

The Genesis 1.1 uses twenty-six of these tweeters configured as a vertical line source (twenty front-firing, and six to the rear). In addition to creating the dipole line source, the output is distributed over many

Ver 2.0	22

1.1 specifications

Genesis Advanced Technologies 1.1 represents a significant leap forward in the realm of advanced audio technologies. This innovative product line is renowned for its uncompromising sound quality and cutting-edge design, catering to audiophiles and music enthusiasts who demand the best from their audio systems.

One of the standout features of Genesis Advanced Technologies 1.1 is its proprietary driver technology. These drivers are meticulously engineered to produce an incredibly accurate and detailed sound stage, allowing listeners to experience music as it was intended by the artists. The advanced materials used in the drivers ensure exceptional linearity and reduced distortion, even at high volume levels. This attention to detail means that every note, from the softest piano keys to the most vigorous orchestral crescendos, is rendered with clarity and fidelity.

In addition to its bespoke drivers, Genesis Advanced Technologies 1.1 incorporates advanced crossover networks. These crossover systems intelligently distribute frequencies between drivers, optimizing performance and ensuring seamless integration across the entire frequency spectrum. This results in a rich and immersive listening experience, making it easy for users to pick out subtle background details in their favorite tracks.

Another significant aspect of Genesis Advanced Technologies 1.1 is its elegant design. The enclosures are not only aesthetically pleasing but are also constructed from high-quality materials designed to minimize resonances and vibrations. The use of innovative dampening techniques enhances the overall audio performance, creating a solid foundation for sound reproduction.

The technology behind Genesis Advanced Technologies also includes sophisticated tuning processes, which calibrate each unit for optimal acoustic performance in various listening environments. Users can often customize settings to suit their room dynamics, achieving a perfectly balanced sound tailored to their individual preferences.

In terms of connectivity, Genesis Advanced Technologies 1.1 supports a variety of options, catering to both traditional and modern audio systems. This versatility ensures compatibility with a wide range of sources, including high-resolution digital formats, vinyl, and streaming services.

Overall, Genesis Advanced Technologies 1.1 embodies a commitment to excellence in audio performance. With its blend of state-of-the-art technology, meticulous craftsmanship, and user-centric design, it continues to set the standard in the high-end audio market. Whether for casual listening or critical evaluation, Genesis Advanced Technologies 1.1 delivers an unparalleled auditory experience that is sure to delight even the most discerning audiophiles.